PartsTable
Technical Data Sheet
Download PDF

92CX312 — LOCKING PLATE,NUT AND BOLT

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

92CX312: LOCKING PLATE,NUT AND BOLT.

The LOCKING PLATE,NUT AND BOLT is a the manufacturer industrial component. Key specifications include width: 0.623 INCHES NOMINAL IN, material: STEEL, body_width: 0.623 INCHES NOMINAL IN, inside_height: 0.125 INCHES NOMINAL IN, plate_thickness: 0.020 INCHES NOMINAL IN, style_designator: SOCKET. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-080-2325, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
92CX312
NSN: 5340-01-080-2325
FSC: 5340 — Hardware, Commercial
CAGE: 45152 — OSHKOSH CORP (USA)
SPECIFICATIONS
width0.623 INCHES NOMINAL IN
materialSTEEL
body_width0.623 INCHES NOMINAL IN
inside_height0.125 INCHES NOMINAL IN
plate_thickness0.020 INCHES NOMINAL IN
style_designatorSOCKET
mounting_hole_diameter0.327 INCHES NOMINAL IN
cross-sectional_shape_styleANGLE
distance_between_mounting_hole_centers1.600 INCHES NOMINAL IN
NSN5340-01-080-2325
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 92CX312 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
PLATE THICKNESS: 0.020 INCHES NOMINAL IN
•
DISTANCE BETWEEN MOUNTING HOLE CENTERS: 1.600 INCHES NOMINAL IN
•
BODY WIDTH: 0.623 INCHES NOMINAL IN
•
STYLE DESIGNATOR: SOCKET
•
MOUNTING HOLE DIAMETER: 0.327 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: ANGLE
•
WIDTH: 0.623 INCHES NOMINAL IN
•
MATERIAL: STEEL
TECHNICAL CHARACTERISTICS
PLATE THICKNESS0.020 INCHES NOMINAL IN
DISTANCE BETWEEN MOUNTING HOLE CENTERS1.600 INCHES NOMINAL IN
BODY WIDTH0.623 INCHES NOMINAL IN
STYLE DESIGNATORSOCKET
MOUNTING HOLE DIAMETER0.327 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLEANGLE
WIDTH0.623 INCHES NOMINAL IN
MATERIALSTEEL
INSIDE HEIGHT0.125 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 2
10505471Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
249959Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 92CX312?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 92CX312?
92CX312 is a LOCKING PLATE,NUT AND BOLT.
What parts can replace 92CX312?
There are 2 known substitutes for 92CX312: 10505471, 249959. Substitute compatibility should be verified for your specific system.
What is the NSN for 92CX312?
92CX312 is cataloged in the U.S. Government catalog under NSN 5340-01-080-2325. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 92CX312

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.