PartsTable
Technical Data Sheet
Download PDF

9293 — ALIGNMENT TOOL,ELECTRONIC EQUIPM

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

9293: ALIGNMENT TOOL,ELECTRONIC EQUIPM.

ALIGNMENT TOOL,ELECTRONIC EQUIPM. Key specifications include material: GLASS FIBER SECOND END SCREWDRIVER TIP, unit_type: SCREWDRIVER, major_diameter: 0.156 INCHES NOMINAL IN, overall_length: 16.000 INCHES NOMINAL IN, special_features: 1/32 IN. TIP THICKNESS AT BOTH ENDS IN.

This part is cataloged in the U.S. Government catalog under NSN 5310-00-412-2562, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
9293
NSN: 5310-00-412-2562
NIINs: 004122562, 004748495, 009759464
FSC: 5310 — Nuts and Washers
CAGE: 83330 — DIALIGHT CORPORATION (USA)
SPECIFICATIONS
materialGLASS FIBER SECOND END SCREWDRIVER TIP
unit_typeSCREWDRIVER
major_diameter0.156 INCHES NOMINAL IN
overall_length16.000 INCHES NOMINAL IN
special_features1/32 IN. TIP THICKNESS AT BOTH ENDS IN
working_end_quantity2
NSN5310-00-412-2562
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 9293 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 0.250 INCHES NOMINAL IN
•
THREAD SERIES: UNIFIED NATIONAL COARSE (UNC)
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-225/3 TEMPER T3 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.138 INCHES IN
•
NUT HEIGHT: 0.438 INCHES NOMINAL IN
•
NUT STYLE: HEXAGON
•
THREAD CLASS: 2B
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS0.250 INCHES NOMINAL IN
THREAD SERIESUNIFIED NATIONAL COARSE (UNC)
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-225/3 TEMPER T3 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.138 INCHES IN
NUT HEIGHT0.438 INCHES NOMINAL IN
NUT STYLEHEXAGON
THREAD CLASS2B
THREAD QUANTITY PER INCH32
MATERIALALUMINUM ALLOY 2011 OVERALL
SUBSTITUTES & CROSS-REFERENCES 5
073-008872-066Reference document
Same NSN cross-reference
Reference document — Secondary reference
44472-03Reference document
Same NSN cross-reference
Reference document — Secondary reference
8214A0632-17Reference document
Same NSN cross-reference
Reference document — Secondary reference
8214A0632-16Reference document
Same NSN cross-reference
Reference document — Secondary reference
0223-9293Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Terminal item — stock exhausted; no further procurementNo demilitarization required
Ready to buy 9293?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 9293?
9293 is a ALIGNMENT TOOL,ELECTRONIC EQUIPM.
What parts can replace 9293?
There are 5 known substitutes for 9293: 073-008872-066, 44472-03, 8214A0632-17 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 9293?
9293 is cataloged in the U.S. Government catalog under NSN 5310-00-412-2562. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 9293