PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 929024-6
929024-6 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The LEAF,BUTT HINGE is a the manufacturer industrial component. Key specifications include material: STEEL COMP 4140 OVERALL, hinge_pin: NOT INCLUDED, knuckle_type: FRICTION, knuckle_length: 0.125 INCHES NOMINAL IN, overall_length: 0.450 INCHES NOMINAL IN, performance_type: NOT RATED. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-167-5673, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
929024-6
NSN: 5340-01-167-5673
FSC: 5340
CAGE: 3B150 — RAYTHEON COMPANY DBA RAYTHEON CO (USA)
SPECIFICATIONS
materialSTEEL COMP 4140 OVERALL
hinge_pinNOT INCLUDED
knuckle_typeFRICTION
knuckle_length0.125 INCHES NOMINAL IN
overall_length0.450 INCHES NOMINAL IN
knuckle_quantity1
performance_typeNOT RATED
surface_treatmentCADMIUM AND CHROMATE OVERALL
material_thickness0.125 INCHES NOMINAL IN
reversible_featureNOT INCLUDED
mounting_hole_diameter0.193 INCHES MINIMUM AND 0.200 INCHES MAXIMUM IN
mounting_hole_quantity2
NSN5340-01-167-5673
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 929024-6 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LEAF OUTER EDGE TO HOLE CENTER VERTICAL DISTANCE: 0.225 INCHES NOMINAL IN
•
KNUCKLE TYPE: FRICTION
•
REVERSIBLE FEATURE: NOT INCLUDED
•
PIN CENTER TO BODY EDGE DISTANCE: 1.188 INCHES NOMINAL IN
•
HINGE PIN: NOT INCLUDED
•
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
•
KNUCKLE QUANTITY: 1
TECHNICAL CHARACTERISTICS (FLIS)
LEAF OUTER EDGE TO HOLE CENTER VERTICAL DISTANCE0.225 INCHES NOMINAL IN
KNUCKLE TYPEFRICTION
REVERSIBLE FEATURENOT INCLUDED
PIN CENTER TO BODY EDGE DISTANCE1.188 INCHES NOMINAL IN
HINGE PINNOT INCLUDED
SURFACE TREATMENTCADMIUM AND CHROMATE OVERALL
OVERALL LENGTH0.450 INCHES NOMINAL IN
KNUCKLE QUANTITY1
MOUNTING HOLE QUANTITY2
KNUCKLE INSIDE DIAMETER0.160 INCHES MINIMUM AND 0.164 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 7
302D131 PIECE 20Interchangeable
interchangeable cross-reference
interchangeable
355-170-002Interchangeable
interchangeable cross-reference
interchangeable
SS50Interchangeable
interchangeable cross-reference
interchangeable
81P-300-A-16MInterchangeable
interchangeable cross-reference
interchangeable
90200-6Interchangeable
interchangeable cross-reference
interchangeable
08-NCL-30LL/F534Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 929024-6?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 929024-6?
929024-6 is a LEAF,BUTT HINGE.
What parts can replace 929024-6?
There are 7 known substitutes for 929024-6: 302D131 PIECE 20, 355-170-002, SS50 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 929024-6?
929024-6 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-167-5673. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 929024-6

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026