PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 928E107 ITEM 35
928E107 ITEM 35 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The NUT,SELF-LOCKING,HEXAGON is a the manufacturer industrial component. Key specifications include material: STEEL COMP 303 NUT, nut_style: HEXAGON, nut_height: 0.157 INCHES MINIMUM AND 0.187 INCHES MAXIMUM IN, temp_rating: 250.0 FAHRENHEIT MAXIMUM DEGF, thread_class: 3B, thread_series: UNJC. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-01-127-2963, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
928E107 ITEM 35
NSN: 5310-01-127-2963
FSC: 5310
CAGE: 94259 — FLUOR MARINE PROPULSION, LLC (USA)
SPECIFICATIONS
materialSTEEL COMP 303 NUT
nut_styleHEXAGON
nut_height0.157 INCHES MINIMUM AND 0.187 INCHES MAXIMUM IN
temp_rating250.0 FAHRENHEIT MAXIMUM DEGF
thread_class3B
thread_seriesUNJC
locking_featurePREVAILING TORQUE WITH NONMETALLIC INSERT
thread_directionRIGHT-HAND
width_across_flats0.336 INCHES MINIMUM AND 0.345 INCHES MAXIMUM IN
nominal_thread_size0.164 INCHES IN
bearing_surface_typeCHAMFERED
special_test_featuresSPECIAL QUALITY CONTROL TESTING
NSN5310-01-127-2963
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 928E107 ITEM 35 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD CLASS: 3B
•
THREAD QUANTITY PER INCH: 32
•
BEARING SURFACE TYPE: CHAMFERED
•
CRITICALITY CODE JUSTIFICATION: ZZZY
•
NOMINAL THREAD SIZE: 0.164 INCHES IN
•
TEST DATA DOCUMENT: 81349-MIL-P-23199 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
•
MATERIAL: PLASTIC POLYAMIDE NYLON LOCKING INSERT
•
REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS: AS DIFFERENTIATED BY MATERIAL WHICH MUST CONFORM TO SHIPS PARTS CONTROL CENTER SPECIAL QUALITY CONTROL PROVISIONS AND CERTIFIED FREE FROM MERCURY CONTAMINATION
TECHNICAL CHARACTERISTICS (FLIS)
THREAD CLASS3B
THREAD QUANTITY PER INCH32
BEARING SURFACE TYPECHAMFERED
CRITICALITY CODE JUSTIFICATIONZZZY
NOMINAL THREAD SIZE0.164 INCHES IN
TEST DATA DOCUMENT81349-MIL-P-23199 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
MATERIALPLASTIC POLYAMIDE NYLON LOCKING INSERT
REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICSAS DIFFERENTIATED BY MATERIAL WHICH MUST CONFORM TO SHIPS PARTS CONTROL CENTER SPECIAL QUALITY CONTROL PROVISIONS AND CERTIFIED FREE FROM MERCURY CONTAMINATION
TEMP RATING250.0 FAHRENHEIT MAXIMUM DEGF
MATERIALSTEEL COMP 303 NUT
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
75NTM82Interchangeable
interchangeable cross-reference
interchangeable
1V0064-00Interchangeable
interchangeable cross-reference
interchangeable
21C1599-22Interchangeable
interchangeable cross-reference
interchangeable
79NTM-82Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 928E107 ITEM 35?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 928E107 ITEM 35?
928E107 ITEM 35 is a NUT,SELF-LOCKING,HEXAGON.
What parts can replace 928E107 ITEM 35?
There are 4 known substitutes for 928E107 ITEM 35: 75NTM82, 1V0064-00, 21C1599-22 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 928E107 ITEM 35?
928E107 ITEM 35 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-01-127-2963. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 928E107 ITEM 35

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026