PartsTable
Technical Data Sheet
Download PDF

928-192 — SCREW,TAPPING

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

928-192: SCREW,TAPPING.

The SCREW,TAPPING is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, head_style: BINDING, head_height: 0.130 INCHES MINIMUM AND 0.141 INCHES MAXIMUM IN, head_diameter: 0.430 INCHES MINIMUM AND 0.454 INCHES MAXIMUM IN, fastener_length: 0.500 INCHES NOMINAL IN, features_provided: CASEHARDENED. This part is cataloged in the U.S.

Government catalog under NSN 5305-01-193-7517, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
928-192
NSN: 5305-01-193-7517
FSC: 5305 — Screws
CAGE: 72741 — DORMAN PRODUCTS, INC. DBA DORMAN (USA)
SPECIFICATIONS
materialSTEEL OVERALL
head_styleBINDING
head_height0.130 INCHES MINIMUM AND 0.141 INCHES MAXIMUM IN
head_diameter0.430 INCHES MINIMUM AND 0.454 INCHES MAXIMUM IN
fastener_length0.500 INCHES NOMINAL IN
features_providedCASEHARDENED
internal_drive_styleSLOT
nonmachine_thread_styleGIMLET POINT (TYPE A, AB OR BA)
nonmachine_nominal_thread_diameter0.216 INCHES IN
NSN5305-01-193-7517
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 928-192 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
NONMACHINE NOMINAL THREAD DIAMETER: 0.216 INCHES IN
•
HEAD HEIGHT: 0.130 INCHES MINIMUM AND 0.141 INCHES MAXIMUM IN
•
FASTENER LENGTH: 0.500 INCHES NOMINAL IN
•
NONMACHINE THREAD STYLE: GIMLET POINT (TYPE A, AB OR BA)
•
FEATURES PROVIDED: CASEHARDENED
•
HEAD STYLE: BINDING
•
INTERNAL DRIVE STYLE: SLOT
•
MATERIAL: STEEL OVERALL
TECHNICAL CHARACTERISTICS
NONMACHINE NOMINAL THREAD DIAMETER0.216 INCHES IN
HEAD HEIGHT0.130 INCHES MINIMUM AND 0.141 INCHES MAXIMUM IN
FASTENER LENGTH0.500 INCHES NOMINAL IN
NONMACHINE THREAD STYLEGIMLET POINT (TYPE A, AB OR BA)
FEATURES PROVIDEDCASEHARDENED
HEAD STYLEBINDING
INTERNAL DRIVE STYLESLOT
MATERIALSTEEL OVERALL
HEAD DIAMETER0.430 INCHES MINIMUM AND 0.454 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES 1
355-192Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 928-192?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 928-192?
928-192 is a SCREW,TAPPING.
What parts can replace 928-192?
There is 1 known substitute for 928-192: 355-192. Substitute compatibility should be verified for your specific system.
What is the NSN for 928-192?
928-192 is cataloged in the U.S. Government catalog under NSN 5305-01-193-7517. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 928-192

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.