PartsTable
Technical Data Sheet
Download PDF

928-09 — CONE AND ROLLERS,TAPERED ROLLER

✓ Government record, cited
Rexel · TAPERED BEARING
PRODUCT OVERVIEW

928-09: CONE AND ROLLERS,TAPERED ROLLER.

Premium Quality A4 manilla suspension files for use in suspension filing drawers & cabinets. Designed for rails 330mm apart. Files are 240mm deep.

Standard V-base to accommodate up to 150 sheets of A4 80gsm paper. Contrasting steel bars. Supplied complete with multi-positionable plastic tabs and printable card inserts.Bright green, Pack of 20 - Made from 100% recycled, fade-resistant manilla.

- Choice of four bright colours for colour-coded filing. - Handy pack of 20 files, complete with tabs and inserts. - Also available in foolscap size.

- Notes: - For Retail and EAPS customers only - Packaging = Shrink wrapped 10's and leaflet. This part is cataloged in the U.S. Government catalog under NSN 3110-00-100-0805, indicating validated use in U.S.

government and defense logistics supply chains.

WHERE IT FITS
928-09
NSN: 3110-00-100-0805
NIINs: 001000805, 010542986, 011398440
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 65282 — WHITE MOTOR CORP (USA)
SPECIFICATIONS
length18.500 INCHES NOMINAL IN
diameter9.0 MILLIMETERS MM
unit_typeFLEXIBLE SHAFT
special_featuresSTAINLESS STEEL
supplementary_features24.3 CM LG; CANNULATED; FOR USE W/JACOBS CHUCK CM
part_name_assigned_by_controlling_agencyREAMER MEDULLARY CANAL 18.50" LG 9 MM DIA FLEX SHAFT W/BRACE SS MM
NSN3110-00-100-0805
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 928-09 · Rexel ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: NORMAL ANGLE
•
CONE CORNER RADIUS: 0.1406 INCHES NOMINAL IN
•
CONE WIDTH: 1.1772 INCHES NOMINAL IN
•
STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 2
•
BORE DIAMETER: 1.8125 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
TECHNICAL CHARACTERISTICS
STYLE DESIGNATORNORMAL ANGLE
CONE CORNER RADIUS0.1406 INCHES NOMINAL IN
CONE WIDTH1.1772 INCHES NOMINAL IN
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 2
BORE DIAMETER1.8125 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
SUBSTITUTES & CROSS-REFERENCES 8
22347Reference document
Same NSN cross-reference
Reference document — Secondary reference
0BT436Reference document
Same NSN cross-reference
Reference document — Secondary reference
436Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
0043004-1Reference document
Same NSN cross-reference
Reference document — Secondary reference
30164Reference document
Same NSN cross-reference
Reference document — Secondary reference
MA1593Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 928-09?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 928-09?
928-09 is a CONE AND ROLLERS,TAPERED ROLLER manufactured by Rexel.
What parts can replace 928-09?
There are 8 known substitutes for 928-09: 22347, 0BT436, 436 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 928-09?
928-09 is cataloged in the U.S. Government catalog under NSN 3110-00-100-0805. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 928-09

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.