PartsTable
Technical Data Sheet
Download PDF

92735A480 — PIN,GROOVED,HEADED

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

92735A480: PIN,GROOVED,HEADED.

The PIN,GROOVED,HEADED is a the manufacturer industrial component. Key specifications include height: 0.110 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN, diameter: 0.368 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN, material: STEEL CORROSION RESISTING OVERALL, head_style: FLAT CHAMFER, undercut_width: 0.039 INCHES NOMINAL IN, first_end_style: SQUARE. This part is cataloged in the U.S.

Government catalog under NSN 5315-01-723-8982, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
92735A480
NSN: 5315-01-723-8982
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 39428 — MCMASTER-CARR SUPPLY CO (USA)
SPECIFICATIONS
height0.110 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN
diameter0.368 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN
materialSTEEL CORROSION RESISTING OVERALL
head_styleFLAT CHAMFER
undercut_width0.039 INCHES NOMINAL IN
first_end_styleSQUARE
effective_length3.313 INCHES NOMINAL IN
style_designatorGROOVE
features_providedLOCK RING
pin_head_diameter0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN
under_head_length3.500 INCHES NOMINAL IN
end_item_identification4210-016220440
NSN5315-01-723-8982
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 92735A480 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
UNDERCUT WIDTH: 0.039 INCHES NOMINAL IN
•
UNDER HEAD LENGTH: 3.500 INCHES NOMINAL IN
•
FIRST END STYLE: SQUARE
•
STYLE DESIGNATOR: GROOVE
•
PIN HEAD DIAMETER: 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: 18-8 STAINLESS STEEL PIN WITH STAINLESS STEEL RETAINING RING MFR REF SINGLE MATERIAL RESPONSE OVERALL
•
DIAMETER: 0.368 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN
•
EFFECTIVE LENGTH: 3.313 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
UNDERCUT WIDTH0.039 INCHES NOMINAL IN
UNDER HEAD LENGTH3.500 INCHES NOMINAL IN
FIRST END STYLESQUARE
STYLE DESIGNATORGROOVE
PIN HEAD DIAMETER0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATION18-8 STAINLESS STEEL PIN WITH STAINLESS STEEL RETAINING RING MFR REF SINGLE MATERIAL RESPONSE OVERALL
DIAMETER0.368 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN
EFFECTIVE LENGTH3.313 INCHES NOMINAL IN
FEATURES PROVIDEDLOCK RING
HEAD STYLEFLAT CHAMFER
SUBSTITUTES & CROSS-REFERENCES 1
4344395Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 92735A480?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 92735A480?
92735A480 is a PIN,GROOVED,HEADED.
What parts can replace 92735A480?
There is 1 known substitute for 92735A480: 4344395. Substitute compatibility should be verified for your specific system.
What is the NSN for 92735A480?
92735A480 is cataloged in the U.S. Government catalog under NSN 5315-01-723-8982. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 92735A480

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.