PartsTable
Technical Data Sheet
Download PDF

927018 — CONE AND ROLLERS,TAPERED ROLLER

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

927018: CONE AND ROLLERS,TAPERED ROLLER.

CONE AND ROLLERS,TAPERED ROLLER. Key specifications include overall_length: 74.00 INCHES NOMINAL IN, style_designator: BUTT, surface_treatment: UNABLE TO DECODE, mounting_hole_diameter: 0.201 INCHES NOMINAL IN, mounting_hole_quantity: 19, end_item_identification: 5419-01-697-4135. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-100-0754, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
927018
NSN: 3110-00-100-0754
NIINs: 001000754, 010289196, 017200080
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 18113 — CHRYSLER CORP HAMTRAMCK ASSEMBLY (USA)
SPECIFICATIONS
overall_length74.00 INCHES NOMINAL IN
style_designatorBUTT
surface_treatmentUNABLE TO DECODE
mounting_hole_diameter0.201 INCHES NOMINAL IN
mounting_hole_quantity19
end_item_identification5419-01-697-4135
part_name_assigned_by_controlling_agencySIDE DOOR HINGE
NSN3110-00-100-0754
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 927018 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: NORMAL ANGLE
•
CONE CORNER RADIUS: 0.1406 INCHES NOMINAL IN
•
CONE WIDTH: 1.0082 INCHES NOMINAL IN
•
STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 2
•
BORE DIAMETER: 1.8125 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
TECHNICAL CHARACTERISTICS
STYLE DESIGNATORNORMAL ANGLE
CONE CORNER RADIUS0.1406 INCHES NOMINAL IN
CONE WIDTH1.0082 INCHES NOMINAL IN
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 2
BORE DIAMETER1.8125 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
SUBSTITUTES & CROSS-REFERENCES 7
2984Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
R6774Reference document
Same NSN cross-reference
Reference document — Secondary reference
K2984Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
10570Reference document
Same NSN cross-reference
Reference document — Secondary reference
MT139Reference document
Same NSN cross-reference
Reference document — Secondary reference
0BT2984Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 927018?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 927018?
927018 is a CONE AND ROLLERS,TAPERED ROLLER.
What parts can replace 927018?
There are 7 known substitutes for 927018: 2984, R6774, K2984 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 927018?
927018 is cataloged in the U.S. Government catalog under NSN 3110-00-100-0754. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 927018

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.