927-58 — Technical Data Sheet

✓ Verified by PartsTable

— · NUT WASHER

WHAT YOU NEED TO KNOW

Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration

Don't mix grades — weakens the joint

PRODUCT OVERVIEW

The RELAY,ELECTROMAGNETIC is a the manufacturer industrial component. Key specifications include diameter: 0.056 INCHES MINIMUM AND 0.060 INCHES MAXIMUM IN, duty_type: CONTINUOUS, time_delay: 0.02 SECONDS MAXIMUM FIXED RELEASE TIME, overall_width: 2.280 INCHES MAXIMUM IN, overall_height: 1.350 INCHES MAXIMUM IN, overall_length: 1.640 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System under NSN 5315-00-011-2726, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

927-58

NSN: 5315-00-011-2726
FSC: 5315
CAGE: 08645 — BRIGGS AND STRATTON CORP (USA)

SPECIFICATIONS

diameter	0.056 INCHES MINIMUM AND 0.060 INCHES MAXIMUM IN
material	STEEL COMP 1008 OR STEEL COMP 1010 OR STEEL COMP 1012 OR STEEL COMP 1015 OR STEEL COMP 1017 OR STEEL COMP 1018 OR STEEL COMP 1020 OVERALL
duty_type	CONTINUOUS
time_delay	0.02 SECONDS MAXIMUM FIXED RELEASE TIME
coil_quantity	1
overall_width	2.280 INCHES MAXIMUM IN
overall_height	1.350 INCHES MAXIMUM IN
overall_length	1.640 INCHES MAXIMUM IN
style_designator	STANDARD
underloop_length	0.438 INCHES MINIMUM AND 0.625 INCHES MAXIMUM IN
winding_quantity	1
surface_treatment	CADMIUM OR ZINC OVERALL
NSN	5315-00-011-2726

COMPONENT DIAGRAM

KEY FEATURES

•

POINT TYPE: EXTENDED PRONG MITRE END OR EXTENDED PRONG BEVEL OR EXTENDED PRONG SQUARE CUT OR ROUND OR STANDARD OR MITRE END OR BEVEL OR MODIFIED HAMMER LOCK OR HAMMER LOCK OR EXTENDED PRONG ANGLE CUT OR CHISEL OR EXTENDED PRONG CHISEL

•

DIAMETER: 0.056 INCHES MINIMUM AND 0.060 INCHES MAXIMUM IN

•

MATERIAL: STEEL COMP 1008 OR STEEL COMP 1010 OR STEEL COMP 1012 OR STEEL COMP 1015 OR STEEL COMP 1017 OR STEEL COMP 1018 OR STEEL COMP 1020 OVERALL

•

UNDERLOOP LENGTH: 0.438 INCHES MINIMUM AND 0.625 INCHES MAXIMUM IN

•

NONDEFINITIVE SPEC/STD DATA: B TYPE AND 2 CLASS OR 3 CLASS

•

STYLE DESIGNATOR: STANDARD

•

SURFACE TREATMENT: CADMIUM OR ZINC OVERALL

•

MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD ALL MATERIAL RESPONSES OVERALL

TECHNICAL CHARACTERISTICS

POINT TYPE	EXTENDED PRONG MITRE END OR EXTENDED PRONG BEVEL OR EXTENDED PRONG SQUARE CUT OR ROUND OR STANDARD OR MITRE END OR BEVEL OR MODIFIED HAMMER LOCK OR HAMMER LOCK OR EXTENDED PRONG ANGLE CUT OR CHISEL OR EXTENDED PRONG CHISEL
DIAMETER	0.056 INCHES MINIMUM AND 0.060 INCHES MAXIMUM IN
MATERIAL	STEEL COMP 1008 OR STEEL COMP 1010 OR STEEL COMP 1012 OR STEEL COMP 1015 OR STEEL COMP 1017 OR STEEL COMP 1018 OR STEEL COMP 1020 OVERALL
UNDERLOOP LENGTH	0.438 INCHES MINIMUM AND 0.625 INCHES MAXIMUM IN
NONDEFINITIVE SPEC/STD DATA	B TYPE AND 2 CLASS OR 3 CLASS
STYLE DESIGNATOR	STANDARD
SURFACE TREATMENT	CADMIUM OR ZINC OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION	66 FED STD ALL MATERIAL RESPONSES OVERALL

VERIFIED SUBSTITUTES & CROSS-REFERENCES 19

5333-5InterchangeableGOVERNMENT REGISTRY