PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 926J165-28
926J165-28 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The PIN,SPRING is a the manufacturer industrial component. Key specifications include diameter: 0.099 INCHES MINIMUM AND 0.103 INCHES MAXIMUM IN, material: STEEL COMP 420 OVERALL, overall_length: 0.500 INCHES NOMINAL IN, hardness_rating: 43.0 ROCKWELL C MINIMUM AND 52.0 ROCKWELL C MAXIMUM OVERALL, style_designator: SLOTTED, surface_treatment: PASSIVATE OVERALL. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-01-176-5984, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
926J165-28
NSN: 5315-01-176-5984
FSC: 5315
CAGE: 94259 — FLUOR MARINE PROPULSION, LLC (USA)
SPECIFICATIONS
diameter0.099 INCHES MINIMUM AND 0.103 INCHES MAXIMUM IN
materialSTEEL COMP 420 OVERALL
overall_length0.500 INCHES NOMINAL IN
hardness_rating43.0 ROCKWELL C MINIMUM AND 52.0 ROCKWELL C MAXIMUM OVERALL
style_designatorSLOTTED
surface_treatmentPASSIVATE OVERALL
material_thickness0.022 INCHES NOMINAL IN
special_test_featuresSPECIAL QUALITY CONTROL TESTING
criticality_code_justificationZZZY
material_document_and_classificationAISI ASSN STD SINGLE MATERIAL RESPONSE OVERALL
reference_number_differentiating_characteristicsAS DIFFERENTIATED BY MATERIAL WHICH MUST CONFORM TO SHIPS PARTS CONTROL CENTER SPECIAL QUALITY CONTROL PROVISIONS AND CERTIFIED FREE FROM MERCURY CONTAMINATION
NSN5315-01-176-5984
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 926J165-28 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CRITICALITY CODE JUSTIFICATION: ZZZY
•
SPECIAL TEST FEATURES: SPECIAL QUALITY CONTROL TESTING
•
DIAMETER: 0.099 INCHES MINIMUM AND 0.103 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: SLOTTED
•
TEST DATA DOCUMENT: 81349-MIL-P-23199 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
•
MATERIAL DOCUMENT AND CLASSIFICATION: AISI ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
HARDNESS RATING: 43.0 ROCKWELL C MINIMUM AND 52.0 ROCKWELL C MAXIMUM OVERALL
•
MATERIAL: STEEL COMP 420 OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
CRITICALITY CODE JUSTIFICATIONZZZY
SPECIAL TEST FEATURESSPECIAL QUALITY CONTROL TESTING
DIAMETER0.099 INCHES MINIMUM AND 0.103 INCHES MAXIMUM IN
STYLE DESIGNATORSLOTTED
TEST DATA DOCUMENT81349-MIL-P-23199 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
MATERIAL DOCUMENT AND CLASSIFICATIONAISI ASSN STD SINGLE MATERIAL RESPONSE OVERALL
HARDNESS RATING43.0 ROCKWELL C MINIMUM AND 52.0 ROCKWELL C MAXIMUM OVERALL
MATERIALSTEEL COMP 420 OVERALL
REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICSAS DIFFERENTIATED BY MATERIAL WHICH MUST CONFORM TO SHIPS PARTS CONTROL CENTER SPECIAL QUALITY CONTROL PROVISIONS AND CERTIFIED FREE FROM MERCURY CONTAMINATION
SURFACE TREATMENTPASSIVATE OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
PS078-0500CRPA022Interchangeable
interchangeable cross-reference
interchangeable
107001-1107Interchangeable
interchangeable cross-reference
interchangeable
13605-1Interchangeable
interchangeable cross-reference
interchangeable
79-022-094-0500Interchangeable
interchangeable cross-reference
interchangeable
284113-0001ITEM94Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 926J165-28?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 926J165-28?
926J165-28 is a PIN,SPRING.
What parts can replace 926J165-28?
There are 5 known substitutes for 926J165-28: PS078-0500CRPA022, 107001-1107, 13605-1 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 926J165-28?
926J165-28 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-01-176-5984. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 926J165-28

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026