PartsTable
Technical Data Sheet
Download PDF

92671101830 — SETSCREW

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

92671101830: SETSCREW.

The SETSCREW is a the manufacturer industrial component. Key specifications include material: STEEL COMP 420 AND STEEL COMP 440F OVERALL, head_style: HEADLESS (SETSCREW), point_style: CONE, thread_class: 3A A, thread_length: 1.110 INCHES MINIMUM AND 1.140 INCHES MAXIMUM IN, fastener_length: 1.110 INCHES MINIMUM AND 1.140 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-01-415-5171, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
92671101830
NSN: 5305-01-415-5171
FSC: 5305 — Screws
CAGE: 0VWL8 — HONEYWELL INTL INC DEFENSE AVIONICS SYSTEMS (USA)
SPECIFICATIONS
materialSTEEL COMP 420 AND STEEL COMP 440F OVERALL
head_styleHEADLESS (SETSCREW)
point_styleCONE
thread_class3A A
thread_length1.110 INCHES MINIMUM AND 1.140 INCHES MAXIMUM IN
fastener_length1.110 INCHES MINIMUM AND 1.140 INCHES MAXIMUM IN
thread_directionRIGHT-HAND
surface_treatmentPASSIVATE OVERALL
width_across_flats0.937 INCHES MINIMUM AND 0.952 INCHES MAXIMUM IN
internal_drive_styleHEXAGON
nominal_thread_diameter0.190 INCHES IN
thread_quantity_per_inch32
NSN5305-01-415-5171
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 92671101830 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 0.937 INCHES MINIMUM AND 0.952 INCHES MAXIMUM IN
•
FASTENER LENGTH: 1.110 INCHES MINIMUM AND 1.140 INCHES MAXIMUM IN
•
THREAD LENGTH: 1.110 INCHES MINIMUM AND 1.140 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
NOMINAL THREAD DIAMETER: 0.190 INCHES IN
•
HEAD STYLE: HEADLESS (SETSCREW)
•
THREAD DIRECTION: RIGHT-HAND
•
POINT STYLE: CONE
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS0.937 INCHES MINIMUM AND 0.952 INCHES MAXIMUM IN
FASTENER LENGTH1.110 INCHES MINIMUM AND 1.140 INCHES MAXIMUM IN
THREAD LENGTH1.110 INCHES MINIMUM AND 1.140 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER0.190 INCHES IN
HEAD STYLEHEADLESS (SETSCREW)
THREAD DIRECTIONRIGHT-HAND
POINT STYLECONE
SURFACE TREATMENTPASSIVATE OVERALL
INTERNAL DRIVE STYLEHEXAGON
SUBSTITUTES & CROSS-REFERENCES 1
101830Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 92671101830?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 92671101830?
92671101830 is a SETSCREW.
What parts can replace 92671101830?
There is 1 known substitute for 92671101830: 101830. Substitute compatibility should be verified for your specific system.
What is the NSN for 92671101830?
92671101830 is cataloged in the U.S. Government catalog under NSN 5305-01-415-5171. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 92671101830

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.