PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 926155
926155 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The TUBE ASSEMBLY,METAL is a the manufacturer industrial component. Key specifications include design_form: STRAIGHT, item_type_category: ACCESSORY, end_item_identification: NSN 5419-01-580-7055, part_name_assigned_by_controlling_agency: SHELF ALIGNER TUBE ASSEMBLY. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-291-7946, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
926155
NSN: 5330-00-291-7946
FSC: 5330
CAGE: 12204 — CHRYSLER REALTY COMPANY LLC DBA DAIMLER CHRYSLER (USA)
SPECIFICATIONS
design_formSTRAIGHT
item_type_categoryACCESSORY
end_item_identificationNSN 5419-01-580-7055
part_name_assigned_by_controlling_agencySHELF ALIGNER TUBE ASSEMBLY
NSN5330-00-291-7946
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 926155 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
ACCOMMODATED SHAFT DIAMETER: 1.188 INCHES NOMINAL IN
•
MATERIAL: LEATHER OR RUBBER SYNTHETIC SEALING ELEMENT
•
CASE STYLE: SQUARE
•
SEALING ELEMENT STYLE: ANGULAR
•
ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 1600 FEET PER MINUTE FT
•
HOUSING BORE DIAMETER: 1.982 INCHES MINIMUM AND 1.984 INCHES MAXIMUM IN
•
SEAL WIDTH: 0.485 INCHES MINIMUM AND 0.515 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
ACCOMMODATED SHAFT DIAMETER1.188 INCHES NOMINAL IN
MATERIALLEATHER OR RUBBER SYNTHETIC SEALING ELEMENT
CASE STYLESQUARE
SEALING ELEMENT STYLEANGULAR
ACCOMMODATED SHAFT MAXIMUM RATED SPEED1600 FEET PER MINUTE FT
HOUSING BORE DIAMETER1.982 INCHES MINIMUM AND 1.984 INCHES MAXIMUM IN
SEAL WIDTH0.485 INCHES MINIMUM AND 0.515 INCHES MAXIMUM IN
MATERIALSTEEL CASE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 26
1766Interchangeable
interchangeable cross-reference
interchangeable
B-543Interchangeable
interchangeable cross-reference
interchangeable
B543B107A000014S000000Interchangeable
interchangeable cross-reference
interchangeable
914534Interchangeable
interchangeable cross-reference
interchangeable
11943AInterchangeable
interchangeable cross-reference
interchangeable
1431Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 926155?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 926155?
926155 is a TUBE ASSEMBLY,METAL.
What parts can replace 926155?
There are 26 known substitutes for 926155: 1766, B-543, B543B107A000014S000000 and 23 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 926155?
926155 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-291-7946. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 926155

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026