PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 9251769
9251769 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The NUT,PLAIN,HEXAGON is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, nut_style: HEXAGON, nut_height: 1.000 INCHES NOMINAL IN, thread_class: 2B, thread_series: UNS, thread_direction: RIGHT-HAND. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-151-8898, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
9251769
NSN: 5310-00-151-8898
FSC: 5310
CAGE: 19203 — COMBAT CAPABILITIES DEVELOPMENT COMMAND (CCDC) ARMAMENTS CENTER DBA CCDC DIV US ARMY RESEARCH, DEVELOPMENT AND ENGINEERING COMMAND ARMAMENT (USA)
SPECIFICATIONS
materialSTEEL OVERALL
nut_styleHEXAGON
nut_height1.000 INCHES NOMINAL IN
thread_class2B
thread_seriesUNS
thread_directionRIGHT-HAND
width_across_flats0.874 INCHES NOMINAL IN
nominal_thread_size0.500 INCHES IN
bearing_surface_typeCHAMFERED
thread_quantity_per_inch10
NSN5310-00-151-8898
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 9251769 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD CLASS: 2B
•
WIDTH ACROSS FLATS: 0.874 INCHES NOMINAL IN
•
BEARING SURFACE TYPE: CHAMFERED
•
THREAD SERIES: UNS
•
NOMINAL THREAD SIZE: 0.500 INCHES IN
•
THREAD QUANTITY PER INCH: 10
•
NUT HEIGHT: 1.000 INCHES NOMINAL IN
•
THREAD DIRECTION: RIGHT-HAND
TECHNICAL CHARACTERISTICS (FLIS)
THREAD CLASS2B
WIDTH ACROSS FLATS0.874 INCHES NOMINAL IN
BEARING SURFACE TYPECHAMFERED
THREAD SERIESUNS
NOMINAL THREAD SIZE0.500 INCHES IN
THREAD QUANTITY PER INCH10
NUT HEIGHT1.000 INCHES NOMINAL IN
THREAD DIRECTIONRIGHT-HAND
MATERIALSTEEL OVERALL
NUT STYLEHEXAGON
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
C040Interchangeable
interchangeable cross-reference
interchangeable
C-041-1101Interchangeable
interchangeable cross-reference
interchangeable
1955Interchangeable
interchangeable cross-reference
interchangeable
SURGICELInterchangeable
interchangeable cross-reference
interchangeable
C04388Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 9251769?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 9251769?
9251769 is a NUT,PLAIN,HEXAGON.
What parts can replace 9251769?
There are 5 known substitutes for 9251769: C040, C-041-1101, 1955 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 9251769?
9251769 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-151-8898. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 9251769

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026