PartsTable
Technical Data Sheet
Download PDF

924A752-1 — NUT,PLAIN,CAP

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

924A752-1: NUT,PLAIN,CAP.

The NUT,PLAIN,CAP is a the manufacturer industrial component. Key specifications include nut_height: 0.125 INCHES MINIMUM AND 0.141 INCHES MAXIMUM IN, thread_class: 3B, thread_series: UNEF, thread_direction: RIGHT-HAND, surface_treatment: NICKEL OVERALL, width_across_flats: 0.302 INCHES MINIMUM AND 0.315 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-613-5150, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
924A752-1
NSN: 5310-00-613-5150
FSC: 5310 — Nuts and Washers
CAGE: 99167 — HAMILTON SUNDSTRAND CORPORATION (USA)
SPECIFICATIONS
nut_height0.125 INCHES MINIMUM AND 0.141 INCHES MAXIMUM IN
thread_class3B
thread_seriesUNEF
thread_directionRIGHT-HAND
surface_treatmentNICKEL OVERALL
width_across_flats0.302 INCHES MINIMUM AND 0.315 INCHES MAXIMUM IN
nominal_thread_size0.250 INCHES IN
bearing_surface_typeFLAT
thread_quantity_per_inch32
part_name_assigned_by_controlling_agencyNAVY SPECIAL PROJECT
surface_treatment_document_and_classification750874,FSCM 12697 MFR REF SINGLE TREATMENT RESPONSE OVERALL
NSN5310-00-613-5150
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 924A752-1 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 0.302 INCHES MINIMUM AND 0.315 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: 750874,FSCM 12697 MFR REF SINGLE TREATMENT RESPONSE OVERALL
•
THREAD SERIES: UNEF
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.250 INCHES IN
•
NUT HEIGHT: 0.125 INCHES MINIMUM AND 0.141 INCHES MAXIMUM IN
•
SURFACE TREATMENT: NICKEL OVERALL
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS0.302 INCHES MINIMUM AND 0.315 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION750874,FSCM 12697 MFR REF SINGLE TREATMENT RESPONSE OVERALL
THREAD SERIESUNEF
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.250 INCHES IN
NUT HEIGHT0.125 INCHES MINIMUM AND 0.141 INCHES MAXIMUM IN
SURFACE TREATMENTNICKEL OVERALL
PART NAME ASSIGNED BY CONTROLLING AGENCYNAVY SPECIAL PROJECT
THREAD CLASS3B
THREAD QUANTITY PER INCH32
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 924A752-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 924A752-1?
924A752-1 is a NUT,PLAIN,CAP.
What is the NSN for 924A752-1?
924A752-1 is cataloged in the U.S. Government catalog under NSN 5310-00-613-5150. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 924A752-1