PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 923F
923F ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

FILTER ELEMENT,INTAKE AIR CLEANE. Key specifications include special_features: BRASS OR NICKEL SILVER. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-156-1918, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
923F
NSN: 3110-00-156-1918
FSC: 3110
CAGE: 39317 — MCGILL MANUFACTURING COMPANY INC USE CAGE CODE 92563 FOR CATALOGING. (USA)
SPECIFICATIONS
special_featuresBRASS OR NICKEL SILVER
NSN3110-00-156-1918
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 923F · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THRUST DIRECTIONAL CAPABILITY DESIGNATION: SINGLE
•
STANDARD TOLERANCE DESIGNATION: AFBMA STD TOLERANCE FOR THRUST BEARINGS
•
SURFACE FINISH: GROUND
•
ALIGNMENT TYPE: RIGID
•
OVERALL OUTSIDE DIAMETER: 165.0 MILLIMETERS NOMINAL MM
•
BORE SMALLEST DIAMETER: 115.0 MILLIMETERS NOMINAL MM
•
MATERIAL: STEEL COMP E51100 OR STEEL COMP E52100 OVERALL
•
STYLE DESIGNATOR: GROOVED RACE SURFACE
TECHNICAL CHARACTERISTICS (FLIS)
THRUST DIRECTIONAL CAPABILITY DESIGNATIONSINGLE
STANDARD TOLERANCE DESIGNATIONAFBMA STD TOLERANCE FOR THRUST BEARINGS
SURFACE FINISHGROUND
ALIGNMENT TYPERIGID
OVERALL OUTSIDE DIAMETER165.0 MILLIMETERS NOMINAL MM
BORE SMALLEST DIAMETER115.0 MILLIMETERS NOMINAL MM
MATERIALSTEEL COMP E51100 OR STEEL COMP E52100 OVERALL
STYLE DESIGNATORGROOVED RACE SURFACE
MATERIAL DOCUMENT AND CLASSIFICATION66 FED STD ALL MATERIAL RESPONSES OVERALL
OVERALL HEIGHT43.0 MILLIMETERS NOMINAL MM
VERIFIED SUBSTITUTES & CROSS-REFERENCES 20
6449Interchangeable
interchangeable cross-reference
interchangeable
FF3096-1PC10Interchangeable
interchangeable cross-reference
interchangeable
68-104PC12Interchangeable
interchangeable cross-reference
interchangeable
38404RInterchangeable
interchangeable cross-reference
interchangeable
SC7Interchangeable
interchangeable cross-reference
interchangeable
1145FInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 923F?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 923F?
923F is a FILTER ELEMENT,INTAKE AIR CLEANE.
What parts can replace 923F?
There are 20 known substitutes for 923F: 6449, FF3096-1PC10, 68-104PC12 and 17 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 923F?
923F is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-156-1918. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 923F

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026