PartsTable
Technical Data Sheet
Download PDF

92364A199 — SCREW,TAPPING

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

92364A199: SCREW,TAPPING.

The SCREW,TAPPING is a the manufacturer industrial component. Key specifications include material: STEEL COMP 410 OVERALL, head_style: PAN, head_height: 0.115 INCHES NOMINAL IN, head_diameter: 0.322 INCHES NOMINAL IN, fastener_length: 1.00 INCHES NOMINAL IN, special_features: DRILL TIP NO. 2.

This part is cataloged in the U.S. Government catalog under NSN 5305-01-705-5024, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
92364A199
NSN: 5305-01-705-5024
FSC: 5305 — Screws
CAGE: 39428 — MCMASTER-CARR SUPPLY CO (USA)
SPECIFICATIONS
materialSTEEL COMP 410 OVERALL
head_stylePAN
head_height0.115 INCHES NOMINAL IN
head_diameter0.322 INCHES NOMINAL IN
fastener_length1.00 INCHES NOMINAL IN
special_featuresDRILL TIP NO. 2
internal_drive_styleCROSS RECESS TYPE II
end_item_identification4940-01-680-2383
nonmachine_thread_styleSELF DRILLING
nonmachine_nominal_thread_diameter0.164 INCHES IN
part_name_assigned_by_controlling_agencySCREW,SS,SELF TAPPING DRILL POINT
NSN5305-01-705-5024
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 92364A199 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
NONMACHINE NOMINAL THREAD DIAMETER: 0.164 INCHES IN
•
HEAD HEIGHT: 0.115 INCHES NOMINAL IN
•
FASTENER LENGTH: 1.00 INCHES NOMINAL IN
•
NONMACHINE THREAD STYLE: SELF DRILLING
•
HEAD STYLE: PAN
•
INTERNAL DRIVE STYLE: CROSS RECESS TYPE II
TECHNICAL CHARACTERISTICS
NONMACHINE NOMINAL THREAD DIAMETER0.164 INCHES IN
HEAD HEIGHT0.115 INCHES NOMINAL IN
FASTENER LENGTH1.00 INCHES NOMINAL IN
NONMACHINE THREAD STYLESELF DRILLING
HEAD STYLEPAN
SPECIAL FEATURESDRILL TIP NO. 2
INTERNAL DRIVE STYLECROSS RECESS TYPE II
PART NAME ASSIGNED BY CONTROLLING AGENCYSCREW,SS,SELF TAPPING DRILL POINT
END ITEM IDENTIFICATION4940-01-680-2383
MATERIALSTEEL COMP 410 OVERALL
SUBSTITUTES & CROSS-REFERENCES 2
11B5091919-2Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
11B5091919Reference document
Same NSN cross-reference
Reference document — Drawing number reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 92364A199?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 92364A199?
92364A199 is a SCREW,TAPPING.
What parts can replace 92364A199?
There are 2 known substitutes for 92364A199: 11B5091919-2, 11B5091919. Substitute compatibility should be verified for your specific system.
What is the NSN for 92364A199?
92364A199 is cataloged in the U.S. Government catalog under NSN 5305-01-705-5024. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 92364A199

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.