PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 9235611-241
9235611-241 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

CONE AND ROLLERS,TAPERED ROLLER. Key specifications include material: STEEL OVERALL, cone_width: 0.4688 INCHES NOMINAL IN, bore_diameter: 1.5000 INCHES NOMINAL IN, style_designator: NORMAL ANGLE, cone_corner_radius: 0.0625 INCHES NOMINAL IN, end_item_identification: USED ON A/T-37 NOSE LANDING GEAR. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-01-398-0674, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
9235611-241
NSN: 3110-01-398-0674
FSC: 3110
CAGE: 60038 — THE TIMKEN CORPORATION (USA)
SPECIFICATIONS
materialSTEEL OVERALL
cone_width0.4688 INCHES NOMINAL IN
bore_diameter1.5000 INCHES NOMINAL IN
style_designatorNORMAL ANGLE
cone_corner_radius0.0625 INCHES NOMINAL IN
end_item_identificationUSED ON A/T-37 NOSE LANDING GEAR
criticality_code_justificationAGAV
standard_tolerance_designationAFBMA CLASS 2
NSN3110-01-398-0674
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 9235611-241 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CONE CORNER RADIUS: 0.0625 INCHES NOMINAL IN
•
STYLE DESIGNATOR: NORMAL ANGLE
•
BORE DIAMETER: 1.5000 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
•
CRITICALITY CODE JUSTIFICATION: AGAV
•
CONE WIDTH: 0.4688 INCHES NOMINAL IN
•
STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 2
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
TECHNICAL CHARACTERISTICS (FLIS)
CONE CORNER RADIUS0.0625 INCHES NOMINAL IN
STYLE DESIGNATORNORMAL ANGLE
END ITEM IDENTIFICATIONUSED ON A/T-37 NOSE LANDING GEAR
BORE DIAMETER1.5000 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
CRITICALITY CODE JUSTIFICATIONAGAV
CONE WIDTH0.4688 INCHES NOMINAL IN
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 2
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
13889-20629Interchangeable
interchangeable cross-reference
interchangeable
13889-2-629Interchangeable
interchangeable cross-reference
interchangeable
3110PL1951717Interchangeable
Same NIIN cross-reference
interchangeable
13889*2-629Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 9235611-241?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 9235611-241?
9235611-241 is a CONE AND ROLLERS,TAPERED ROLLER.
What parts can replace 9235611-241?
There are 4 known substitutes for 9235611-241: 13889-20629, 13889-2-629, 3110PL1951717 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 9235611-241?
9235611-241 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-01-398-0674. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 9235611-241

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026