PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 923228-8
923228-8 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,THRUST is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, alignment_type: RIGID, overall_height: 0.3544 INCHES MINIMUM AND 0.3644 INCHES MAXIMUM IN, surface_finish: UNGROUND, special_features: BANDED OD, style_designator: GROOVED RACE SURFACE, BANDED OD. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-120-4458, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
923228-8
NSN: 3110-00-120-4458
FSC: 3110
CAGE: 0AHP5 — CURTISS-WRIGHT CONTROLS, INC. DIV ACTUATION DIVISION (USA)
SPECIFICATIONS
materialSTEEL OVERALL
alignment_typeRIGID
overall_height0.3544 INCHES MINIMUM AND 0.3644 INCHES MAXIMUM IN
surface_finishUNGROUND
special_featuresBANDED OD
style_designatorGROOVED RACE SURFACE, BANDED OD
bore_smallest_diameter0.3750 INCHES MINIMUM AND 0.3800 INCHES MAXIMUM IN
overall_outside_diameter1.0419 INCHES MINIMUM AND 1.0519 INCHES MAXIMUM IN
thrust_directional_capability_designationSINGLE
NSN3110-00-120-4458
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 923228-8 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
ALIGNMENT TYPE: RIGID
•
SURFACE FINISH: UNGROUND
•
THRUST DIRECTIONAL CAPABILITY DESIGNATION: SINGLE
•
BORE SMALLEST DIAMETER: 0.3750 INCHES MINIMUM AND 0.3800 INCHES MAXIMUM IN
•
OVERALL OUTSIDE DIAMETER: 1.0419 INCHES MINIMUM AND 1.0519 INCHES MAXIMUM IN
•
MATERIAL: STEEL OVERALL
•
STYLE DESIGNATOR: GROOVED RACE SURFACE, BANDED OD
TECHNICAL CHARACTERISTICS (FLIS)
SPECIAL FEATURESBANDED OD
ALIGNMENT TYPERIGID
SURFACE FINISHUNGROUND
THRUST DIRECTIONAL CAPABILITY DESIGNATIONSINGLE
BORE SMALLEST DIAMETER0.3750 INCHES MINIMUM AND 0.3800 INCHES MAXIMUM IN
OVERALL OUTSIDE DIAMETER1.0419 INCHES MINIMUM AND 1.0519 INCHES MAXIMUM IN
MATERIALSTEEL OVERALL
STYLE DESIGNATORGROOVED RACE SURFACE, BANDED OD
OVERALL HEIGHT0.3544 INCHES MINIMUM AND 0.3644 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 22
1324Interchangeable
interchangeable cross-reference
interchangeable
1324CInterchangeable
interchangeable cross-reference
interchangeable
AEQ-1324Interchangeable
interchangeable cross-reference
interchangeable
520-950Interchangeable
interchangeable cross-reference
interchangeable
2-9-108Interchangeable
interchangeable cross-reference
interchangeable
2-2-55Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 923228-8?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 923228-8?
923228-8 is a BEARING,BALL,THRUST.
What parts can replace 923228-8?
There are 22 known substitutes for 923228-8: 1324, 1324C, AEQ-1324 and 19 more. Substitute compatibility should be verified for your specific system.
Is 923228-8 still available?
923228-8 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 923228-8

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026