PartsTable
Technical Data Sheet
Download PDF

92210A302 — SCREW,CAP,SOCKET HEAD

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

92210A302: SCREW,CAP,SOCKET HEAD.

The SCREW,CAP,SOCKET HEAD is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING OVERALL, head_style: FLAT COUNTERSUNK, thread_class: 3A A, head_diameter: 0.411 INCHES NOMINAL IN, thread_length: 0.373 INCHES NOMINAL IN, fastener_length: 0.500 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-01-548-6408, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
92210A302
NSN: 5305-01-548-6408
FSC: 5305 — Screws
CAGE: 3A054 — MCMASTER-CARR SUPPLY CO (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING OVERALL
head_styleFLAT COUNTERSUNK
thread_class3A A
head_diameter0.411 INCHES NOMINAL IN
thread_length0.373 INCHES NOMINAL IN
fastener_length0.500 INCHES NOMINAL IN
thread_directionRIGHT-HAND
countersink_angle82.0 DEGREES NOMINAL
width_across_flats0.125 INCHES NOMINAL IN
internal_drive_styleHEXAGON
end_item_identificationSPECIAL AIRCRAFT AND ENGINE TOOL AND SUPPORT EQUIPMENT
nominal_thread_diameter0.190 INCHES IN
NSN5305-01-548-6408
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 92210A302 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 0.125 INCHES NOMINAL IN
•
FASTENER LENGTH: 0.500 INCHES NOMINAL IN
•
THREAD LENGTH: 0.373 INCHES NOMINAL IN
•
NOMINAL THREAD DIAMETER: 0.190 INCHES IN
•
HEAD STYLE: FLAT COUNTERSUNK
•
THREAD DIRECTION: RIGHT-HAND
•
INTERNAL DRIVE STYLE: HEXAGON
•
COUNTERSINK ANGLE: 82.0 DEGREES NOMINAL
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS0.125 INCHES NOMINAL IN
FASTENER LENGTH0.500 INCHES NOMINAL IN
THREAD LENGTH0.373 INCHES NOMINAL IN
NOMINAL THREAD DIAMETER0.190 INCHES IN
HEAD STYLEFLAT COUNTERSUNK
THREAD DIRECTIONRIGHT-HAND
INTERNAL DRIVE STYLEHEXAGON
COUNTERSINK ANGLE82.0 DEGREES NOMINAL
PART NAME ASSIGNED BY CONTROLLING AGENCY18-8 STAINLESS STEEL FLAT SOCKET HEAD CAP SCREW
THREAD CLASS3A A
SUBSTITUTES & CROSS-REFERENCES 1
21-0038Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 92210A302?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 92210A302?
92210A302 is a SCREW,CAP,SOCKET HEAD.
What parts can replace 92210A302?
There is 1 known substitute for 92210A302: 21-0038. Substitute compatibility should be verified for your specific system.
What is the NSN for 92210A302?
92210A302 is cataloged in the U.S. Government catalog under NSN 5305-01-548-6408. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 92210A302

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.