PartsTable
Technical Data Sheet
PartsTable / MRO / 922-5
922-5 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The COVER,ELECTRICAL CONNECTOR is a the manufacturer industrial component. Key specifications include angle: 30.0 DEGREES NOMINAL, width: 1.000 INCHES NOMINAL IN, length: 1.093 INCHES NOMINAL IN, material: STEEL SHAFT, duty_type: CONTINUOUS, nut_style: EXTERNAL TOOTH. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-063-7360, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 922-5
NSN: 5310-00-063-7360
FSC: 5310
CAGE: 73734 — FEDERAL SCREW PRODUCTS, INC. (USA)
SPECIFICATIONS
angle30.0 DEGREES NOMINAL
width1.000 INCHES NOMINAL IN
length1.093 INCHES NOMINAL IN
materialSTEEL SHAFT
duty_typeCONTINUOUS
nut_styleEXTERNAL TOOTH
thickness0.343 INCHES NOMINAL IN
top_styleBEVELED FRONT WITH LEFT EDGE BEVELED
body_styleRECTANGULAR COMMUTATOR
body_width0.090 INCHES MINIMUM AND 0.110 INCHES MAXIMUM IN
nut_height0.109 INCHES NOMINAL IN
shell_typeSPLIT
NSN5310-00-063-7360
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 922-5 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
NUT STYLE: EXTERNAL TOOTH
•
WASHER OUTSIDE DIAMETER: 0.344 INCHES NOMINAL IN
•
THREAD QUANTITY PER INCH: 32
•
NOMINAL THREAD SIZE: 0.138 INCHES IN
•
THREAD SERIES: UNIFIED NATIONAL COARSE (UNC)
•
MATERIAL DOCUMENT AND CLASSIFICATION: SAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
SURFACE TREATMENT: CHROMATE ZINC OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL HEIGHT0.141 INCHES NOMINAL IN
NUT STYLEEXTERNAL TOOTH
WASHER OUTSIDE DIAMETER0.344 INCHES NOMINAL IN
THREAD QUANTITY PER INCH32
NOMINAL THREAD SIZE0.138 INCHES IN
THREAD SERIESUNIFIED NATIONAL COARSE (UNC)
MATERIAL DOCUMENT AND CLASSIFICATIONSAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL
SURFACE TREATMENTCHROMATE ZINC OVERALL
MATERIALSTEEL COMP 1020 OVERALL
THREAD CLASS2B
VERIFIED SUBSTITUTES & CROSS-REFERENCES 23
62A100C5001Interchangeable
interchangeable cross-reference
interchangeable
9225Interchangeable
interchangeable cross-reference
interchangeable
5950PL0809210Interchangeable
interchangeable cross-reference
interchangeable
10183032-25Interchangeable
interchangeable cross-reference
interchangeable
6061Interchangeable
interchangeable cross-reference
interchangeable
IN59Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 922-5?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 922-5?
922-5 is a COVER,ELECTRICAL CONNECTOR. It is classified as a MRO (MRO_GENERAL).
What parts can replace 922-5?
There are 23 known substitutes for 922-5: 62A100C5001, 9225, 5950PL0809210 and 20 more. Substitute compatibility should be verified for your specific system.
Is 922-5 still available?
922-5 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 922-5

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026