PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 92197A244
92197A244 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The SCREW,CAP,SOCKET HEAD is a the manufacturer industrial component. Key specifications include head_style: FLAT CHAMFER, head_height: 0.185 INCHES MINIMUM AND 0.190 INCHES MAXIMUM IN, thread_class: 3A A, head_diameter: 0.303 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN, thread_length: 0.533 INCHES MINIMUM AND 0.625 INCHES MAXIMUM IN, fastener_length: 0.595 INCHES MINIMUM AND 0.625 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-01-264-1467, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
92197A244
NSN: 5305-01-264-1467
FSC: 5305
CAGE: 39428 — MCMASTER-CARR SUPPLY CO (USA)
SPECIFICATIONS
materialSTEEL COMP 302 OR STEEL COMP 302B OR STEEL COMP 303 OR STEEL COMP 303 PLUS X OR STEEL COMP 303SE OR STEEL COMP 303CU OR STEEL COMP 303MA OR STEEL COMP 304 OR STEEL COMP 304L OVERALL
head_styleFLAT CHAMFER
head_height0.185 INCHES MINIMUM AND 0.190 INCHES MAXIMUM IN
thread_class3A A
head_diameter0.303 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN
thread_length0.533 INCHES MINIMUM AND 0.625 INCHES MAXIMUM IN
fastener_length0.595 INCHES MINIMUM AND 0.625 INCHES MAXIMUM IN
thread_directionRIGHT-HAND
width_across_flats0.156 INCHES NOMINAL IN
internal_drive_styleHEXAGON
nominal_thread_diameter0.190 INCHES IN
minimum_tensile_strength75000 POUNDS PER SQUARE INCH LBS
NSN5305-01-264-1467
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 92197A244 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD DIRECTION: RIGHT-HAND
•
INTERNAL DRIVE STYLE: HEXAGON
•
WIDTH ACROSS FLATS: 0.156 INCHES NOMINAL IN
•
MATERIAL: STEEL COMP 302 OR STEEL COMP 302B OR STEEL COMP 303 OR STEEL COMP 303 PLUS X OR STEEL COMP 303SE OR STEEL COMP 303CU OR STEEL COMP 303MA OR STEEL COMP 304 OR STEEL COMP 304L OVERALL
•
THREAD CLASS: 3A A
•
THREAD QUANTITY PER INCH: 32
•
MINIMUM TENSILE STRENGTH: 75000 POUNDS PER SQUARE INCH LBS
•
HEAD STYLE: FLAT CHAMFER
TECHNICAL CHARACTERISTICS (FLIS)
THREAD DIRECTIONRIGHT-HAND
INTERNAL DRIVE STYLEHEXAGON
WIDTH ACROSS FLATS0.156 INCHES NOMINAL IN
MATERIALSTEEL COMP 302 OR STEEL COMP 302B OR STEEL COMP 303 OR STEEL COMP 303 PLUS X OR STEEL COMP 303SE OR STEEL COMP 303CU OR STEEL COMP 303MA OR STEEL COMP 304 OR STEEL COMP 304L OVERALL
THREAD CLASS3A A
THREAD QUANTITY PER INCH32
MINIMUM TENSILE STRENGTH75000 POUNDS PER SQUARE INCH LBS
HEAD STYLEFLAT CHAMFER
THREAD SERIES DESIGNATORUNF
FASTENER LENGTH0.595 INCHES MINIMUM AND 0.625 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 13
NASM24671-78Interchangeable
interchangeable cross-reference
interchangeable
MS24671-78Interchangeable
interchangeable cross-reference
interchangeable
FF-S-86 TYPE IVInterchangeable
interchangeable cross-reference
interchangeable
51480Interchangeable
interchangeable cross-reference
interchangeable
100A905078Interchangeable
interchangeable cross-reference
interchangeable
0.750-10UNC-3A2.250 LGInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 92197A244?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 92197A244?
92197A244 is a SCREW,CAP,SOCKET HEAD.
What parts can replace 92197A244?
There are 13 known substitutes for 92197A244: NASM24671-78, MS24671-78, FF-S-86 TYPE IV and 10 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 92197A244?
92197A244 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-01-264-1467. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 92197A244

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026