PartsTable
Technical Data Sheet
Download PDF

92196A115 — SCREW,CAP,SOCKET HEAD

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

92196A115: SCREW,CAP,SOCKET HEAD.

The SCREW,CAP,SOCKET HEAD is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING OVERALL, head_style: PAN NO. 2, head_height: 0.112 INCHES NOMINAL IN, thread_class: 3A A, head_diameter: 0.183 INCHES NOMINAL IN, thread_length: 0.750 INCHES MINIMUM AND 1.000 INCHES MAXIMUM IN.

This part is cataloged in the U.S. Government catalog under NSN 5305-01-590-6965, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
92196A115
NSN: 5305-01-590-6965
FSC: 5305 — Screws
CAGE: 39428 — MCMASTER-CARR SUPPLY CO (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING OVERALL
head_stylePAN NO. 2
head_height0.112 INCHES NOMINAL IN
thread_class3A A
head_diameter0.183 INCHES NOMINAL IN
thread_length0.750 INCHES MINIMUM AND 1.000 INCHES MAXIMUM IN
fastener_length1.000 INCHES NOMINAL IN
hardness_rating40.0 ROCKWELL B NOMINAL OVERALL
thread_directionRIGHT-HAND
width_across_flats0.094 INCHES NOMINAL IN
internal_drive_styleHEXAGON
end_item_identification5895-01-562-6898 SATELLITE COMMUNICATION SYSTEM
NSN5305-01-590-6965
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 92196A115 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 0.094 INCHES NOMINAL IN
•
HEAD HEIGHT: 0.112 INCHES NOMINAL IN
•
FASTENER LENGTH: 1.000 INCHES NOMINAL IN
•
THREAD LENGTH: 0.750 INCHES MINIMUM AND 1.000 INCHES MAXIMUM IN
•
HARDNESS RATING: 40.0 ROCKWELL B NOMINAL OVERALL
•
NOMINAL THREAD DIAMETER: 0.112 INCHES IN
•
HEAD STYLE: PAN NO. 2
•
THREAD DIRECTION: RIGHT-HAND
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS0.094 INCHES NOMINAL IN
HEAD HEIGHT0.112 INCHES NOMINAL IN
FASTENER LENGTH1.000 INCHES NOMINAL IN
THREAD LENGTH0.750 INCHES MINIMUM AND 1.000 INCHES MAXIMUM IN
HARDNESS RATING40.0 ROCKWELL B NOMINAL OVERALL
NOMINAL THREAD DIAMETER0.112 INCHES IN
HEAD STYLEPAN NO. 2
THREAD DIRECTIONRIGHT-HAND
MINIMUM TENSILE STRENGTH70000 POUNDS PER SQUARE INCH LBS
INTERNAL DRIVE STYLEHEXAGON
OTHER ITEMS IN FSC 5305 — Screws
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5305-00-000-0094 5305-00-000-1397 5305-00-000-2625 5305-00-000-3669 5305-00-000-3830 5305-00-000-3831
SUBSTITUTES & CROSS-REFERENCES 1
001-030009R00Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 92196A115?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 92196A115?
92196A115 is a SCREW,CAP,SOCKET HEAD.
What parts can replace 92196A115?
There is 1 known substitute for 92196A115: 001-030009R00. Substitute compatibility should be verified for your specific system.
What is the NSN for 92196A115?
92196A115 is cataloged in the U.S. Government catalog under NSN 5305-01-590-6965. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 92196A115

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.