PartsTable
Technical Data Sheet
Download PDF

92186A544 — SCREW,CAP,HEXAGON HEAD

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

92186A544: SCREW,CAP,HEXAGON HEAD.

The SCREW,CAP,HEXAGON HEAD is a the manufacturer industrial component. Key specifications include head_style: HEXAGON, head_height: 0.156 INCHES NOMINAL IN, thread_class: 2A A, thread_length: 0.750 INCHES NOMINAL IN, fastener_length: 1.250 INCHES NOMINAL IN, thread_direction: RIGHT-HAND. This part is cataloged in the U.S.

Government catalog under NSN 5305-01-485-3611, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
92186A544
NSN: 5305-01-485-3611
FSC: 5305 — Screws
CAGE: 39428 — MCMASTER-CARR SUPPLY CO (USA)
SPECIFICATIONS
head_styleHEXAGON
head_height0.156 INCHES NOMINAL IN
thread_class2A A
thread_length0.750 INCHES NOMINAL IN
fastener_length1.250 INCHES NOMINAL IN
thread_directionRIGHT-HAND
width_between_flats0.438 INCHES NOMINAL IN
end_item_identificationMRAP - COUGAR; MRAP - M-ATV DV178; MRAP - COUGAR CAT1 A2
nominal_thread_diameter0.250 INCHES IN
minimum_tensile_strength70000 POUNDS PER SQUARE INCH LBS
thread_quantity_per_inch20
thread_series_designatorUNIFIED NATIONAL COARSE (UNC)
NSN5305-01-485-3611
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 92186A544 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.156 INCHES NOMINAL IN
•
FASTENER LENGTH: 1.250 INCHES NOMINAL IN
•
THREAD LENGTH: 0.750 INCHES NOMINAL IN
•
NOMINAL THREAD DIAMETER: 0.250 INCHES IN
•
HEAD STYLE: HEXAGON
•
THREAD DIRECTION: RIGHT-HAND
•
WIDTH BETWEEN FLATS: 0.438 INCHES NOMINAL IN
•
MINIMUM TENSILE STRENGTH: 70000 POUNDS PER SQUARE INCH LBS
TECHNICAL CHARACTERISTICS
HEAD HEIGHT0.156 INCHES NOMINAL IN
FASTENER LENGTH1.250 INCHES NOMINAL IN
THREAD LENGTH0.750 INCHES NOMINAL IN
NOMINAL THREAD DIAMETER0.250 INCHES IN
HEAD STYLEHEXAGON
THREAD DIRECTIONRIGHT-HAND
WIDTH BETWEEN FLATS0.438 INCHES NOMINAL IN
MINIMUM TENSILE STRENGTH70000 POUNDS PER SQUARE INCH LBS
THREAD CLASS2A A
END ITEM IDENTIFICATIONMRAP - COUGAR; MRAP - M-ATV DV178; MRAP - COUGAR CAT1 A2
OTHER ITEMS IN FSC 5305 — Screws
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5305-00-001-5016 5305-00-001-9160 5305-00-001-9629 5305-00-001-9742 5305-00-001-9768 5305-00-003-4306 5305-00-003-6694 5305-00-003-6753
SUBSTITUTES & CROSS-REFERENCES 1
MS35307-310S316Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 92186A544?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 92186A544?
92186A544 is a SCREW,CAP,HEXAGON HEAD.
What parts can replace 92186A544?
There is 1 known substitute for 92186A544: MS35307-310S316. Substitute compatibility should be verified for your specific system.
What is the NSN for 92186A544?
92186A544 is cataloged in the U.S. Government catalog under NSN 5305-01-485-3611. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 92186A544