PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 9215-01
9215-01 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

RESISTOR,VARIABLE,NONWIRE WOUND,. Key specifications include material: STEEL OVERALL, shank_length: 2.750 INCHES NOMINAL IN, thread_class: 3A A, thread_length: 2.375 INCHES MAXIMUM IN, overall_length: 4.438 INCHES NOMINAL IN, thread_direction: RIGHT-HAND. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5306-00-206-6290, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
9215-01
NSN: 5306-00-206-6290
FSC: 5306
CAGE: 80020 — NAVAL AIR WARFARE CENTER AIRCRAFT DIVISION JOINT BASE JBMDL (USA)
SPECIFICATIONS
materialSTEEL OVERALL
shank_length2.750 INCHES NOMINAL IN
thread_class3A A
thread_length2.375 INCHES MAXIMUM IN
overall_length4.438 INCHES NOMINAL IN
thread_directionRIGHT-HAND
eye_outside_width1.500 INCHES NOMINAL IN
eye_inside_diameter0.516 INCHES NOMINAL IN
eye_stock_thickness0.500 INCHES NOMINAL IN
nominal_thread_diameter0.500 INCHES IN
thread_quantity_per_inch13
thread_series_designatorUNIFIED NATIONAL COARSE (UNC)
NSN5306-00-206-6290
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 9215-01 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
DISTANCE FROM CENTER OF EYE TO SHANK END: 0.778 INCHES NOMINAL IN
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD DIAMETER: 0.500 INCHES IN
•
EYE STOCK THICKNESS: 0.500 INCHES NOMINAL IN
•
EYE OUTSIDE WIDTH: 1.500 INCHES NOMINAL IN
•
THREAD QUANTITY PER INCH: 13
•
THREAD CLASS: 3A A
TECHNICAL CHARACTERISTICS (FLIS)
DISTANCE FROM CENTER OF EYE TO SHANK END0.778 INCHES NOMINAL IN
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD DIAMETER0.500 INCHES IN
EYE STOCK THICKNESS0.500 INCHES NOMINAL IN
EYE OUTSIDE WIDTH1.500 INCHES NOMINAL IN
THREAD QUANTITY PER INCH13
THREAD CLASS3A A
OVERALL LENGTH4.438 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
THREAD LENGTH2.375 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
227-6029P020Interchangeable
interchangeable cross-reference
interchangeable
1102-15-0519Interchangeable
interchangeable cross-reference
interchangeable
EBR12BT1Interchangeable
interchangeable cross-reference
interchangeable
9215-01Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 9215-01?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 9215-01?
9215-01 is a RESISTOR,VARIABLE,NONWIRE WOUND,.
What parts can replace 9215-01?
There are 4 known substitutes for 9215-01: 227-6029P020, 1102-15-0519, EBR12BT1 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 9215-01?
9215-01 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5306-00-206-6290. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 9215-01

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026