PartsTable
Technical Data Sheet
Download PDF

92108742 — CUP,SUCTION

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

92108742: CUP,SUCTION.

The CUP,SUCTION is a the manufacturer industrial component. Key specifications include cup_diameter: 6.0 INCHES NOMINAL IN, special_features: 3/4" LONG 1/4-20 THREADED STUD; MINIMUM RADIUS FOR CURVED LOADS 305 MM. MM, nondefinitive_spec/std_data: HEIGHT PLATFORM 4.0 CM MOUNTING CM, part_name_assigned_by_controlling_agency: SIX INCH MOUNTING CUP WITH THREADED STUD.

This part is cataloged in the U.S. Government catalog under NSN 5340-01-685-2606, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
92108742
NSN: 5340-01-685-2606
FSC: 5340 — Hardware, Commercial
CAGE: F6481 — THALES SA (FRA)
SPECIFICATIONS
cup_diameter6.0 INCHES NOMINAL IN
special_features3/4" LONG 1/4-20 THREADED STUD; MINIMUM RADIUS FOR CURVED LOADS 305 MM. MM
nondefinitive_spec/std_dataHEIGHT PLATFORM 4.0 CM MOUNTING CM
part_name_assigned_by_controlling_agencySIX INCH MOUNTING CUP WITH THREADED STUD
NSN5340-01-685-2606
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 92108742 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
NONDEFINITIVE SPEC/STD DATA: HEIGHT PLATFORM 4.0 CM MOUNTING CM
•
CUP DIAMETER: 6.0 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
NONDEFINITIVE SPEC/STD DATAHEIGHT PLATFORM 4.0 CM MOUNTING CM
CUP DIAMETER6.0 INCHES NOMINAL IN
SPECIAL FEATURES3/4" LONG 1/4-20 THREADED STUD; MINIMUM RADIUS FOR CURVED LOADS 305 MM. MM
PART NAME ASSIGNED BY CONTROLLING AGENCYSIX INCH MOUNTING CUP WITH THREADED STUD
SUBSTITUTES & CROSS-REFERENCES 2
91359Reference document
Same NSN cross-reference
Reference document — Secondary reference
TL6AMReference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 92108742?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 92108742?
92108742 is a CUP,SUCTION.
What parts can replace 92108742?
There are 2 known substitutes for 92108742: 91359, TL6AM. Substitute compatibility should be verified for your specific system.
What is the NSN for 92108742?
92108742 is cataloged in the U.S. Government catalog under NSN 5340-01-685-2606. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 92108742

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.