PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 9204HMILG23827
9204HMILG23827 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL COMP E52100 BALL, bore_shape: STRAIGHT, bore_diameter: 20.00 MILLIMETERS NOMINAL MM, overall_width: 14.00 MILLIMETERS NOMINAL MM, load_direction: ANGULAR, surface_finish: GROUND. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-402-5887, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
9204HMILG23827
NSN: 3110-00-402-5887
FSC: 3110
CAGE: 38443 — SKF USA INC. (USA)
SPECIFICATIONS
materialSTEEL COMP E52100 BALL
bore_shapeSTRAIGHT
bore_diameter20.00 MILLIMETERS NOMINAL MM
overall_width14.00 MILLIMETERS NOMINAL MM
load_directionANGULAR
surface_finishGROUND
style_designator4 POINT BALL CONTACT, SPLIT INNER AND OUTER RINGS, SEPARABLE
lubrication_materialGREASE
overall_outside_diameter47.00 MILLIMETERS NOMINAL MM
internal_fit-up_designationSTANDARD
retainer_fabrication_methodMACHINED
standard_tolerance_designationABEC NO.1
NSN3110-00-402-5887
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 9204HMILG23827 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
INTERNAL FIT-UP DESIGNATION: STANDARD
•
BORE SHAPE: STRAIGHT
•
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION: MIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE
•
STANDARD TOLERANCE DESIGNATION: ABEC NO.1
•
LOAD DIRECTION: ANGULAR
•
SURFACE FINISH: GROUND
•
RETAINER FABRICATION METHOD: MACHINED
•
LUBRICATION MATERIAL: GREASE
TECHNICAL CHARACTERISTICS (FLIS)
INTERNAL FIT-UP DESIGNATIONSTANDARD
BORE SHAPESTRAIGHT
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATIONMIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE
STANDARD TOLERANCE DESIGNATIONABEC NO.1
LOAD DIRECTIONANGULAR
SURFACE FINISHGROUND
RETAINER FABRICATION METHODMACHINED
LUBRICATION MATERIALGREASE
STYLE DESIGNATOR4 POINT BALL CONTACT, SPLIT INNER AND OUTER RINGS, SEPARABLE
MATERIALSTEEL COMP E52100 OUTER RING
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
3831-4Interchangeable
interchangeable cross-reference
interchangeable
41818-64Interchangeable
interchangeable cross-reference
interchangeable
376MAA1Interchangeable
interchangeable cross-reference
interchangeable
0614Interchangeable
interchangeable cross-reference
interchangeable
X517-1Interchangeable
interchangeable cross-reference
interchangeable
18345Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 9204HMILG23827?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 9204HMILG23827?
9204HMILG23827 is a BEARING,BALL,ANNULAR.
What parts can replace 9204HMILG23827?
There are 6 known substitutes for 9204HMILG23827: 3831-4, 41818-64, 376MAA1 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 9204HMILG23827?
9204HMILG23827 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-402-5887. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 9204HMILG23827

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026