PartsTable
Technical Data Sheet
Download PDF

92007A0387-2 — PIN,STRAIGHT,HEADED

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

92007A0387-2: PIN,STRAIGHT,HEADED.

The PIN,STRAIGHT,HEADED is a the manufacturer industrial component. Key specifications include diameter: 0.230 INCHES MINIMUM AND 0.232 INCHES MAXIMUM IN, material: STEEL OVERALL, head_style: FLAT CHAMFER, chamfer_length: 0.020 INCHES MINIMUM AND 0.060 INCHES MAXIMUM IN, surface_finish: 250.0 MICROINCHES OVERALL, hardness_rating: 30.0 ROCKWELL C MINIMUM AND 35.0 ROCKWELL C MAXIMUM OVERALL. This part is cataloged in the U.S.

Government catalog under NSN 5315-01-466-5220, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
92007A0387-2
NSN: 5315-01-466-5220
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 01365 — MARINE CORPS SYSTEMS COMMAND DIV MARINE CORPS SYSTEMS COMMAND TECHNICAL DATA REPOSITORY CUSTOMER SERVICE (USA)
SPECIFICATIONS
diameter0.230 INCHES MINIMUM AND 0.232 INCHES MAXIMUM IN
materialSTEEL OVERALL
head_styleFLAT CHAMFER
chamfer_length0.020 INCHES MINIMUM AND 0.060 INCHES MAXIMUM IN
surface_finish250.0 MICROINCHES OVERALL
hardness_rating30.0 ROCKWELL C MINIMUM AND 35.0 ROCKWELL C MAXIMUM OVERALL
style_designatorSTRAIGHT
pin_head_diameter0.390 INCHES MINIMUM AND 0.410 INCHES MAXIMUM IN
surface_treatmentCADMIUM OVERALL
under_head_length2.920 INCHES MINIMUM AND 2.960 INCHES MAXIMUM IN
hole_arrangement_styleONE END DRILLED
end_item_identification2320-01-123-1610
NSN5315-01-466-5220
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 92007A0387-2 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE FINISH: 250.0 MICROINCHES OVERALL
•
CHAMFER LENGTH: 0.020 INCHES MINIMUM AND 0.060 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-STD-171 MIL STD SINGLE TREATMENT RESPONSE OVERALL
•
HOLE ARRANGEMENT STYLE: ONE END DRILLED
•
UNDER HEAD LENGTH: 2.920 INCHES MINIMUM AND 2.960 INCHES MAXIMUM IN
•
HARDNESS RATING: 30.0 ROCKWELL C MINIMUM AND 35.0 ROCKWELL C MAXIMUM OVERALL
•
STYLE DESIGNATOR: STRAIGHT
•
PIN HEAD DIAMETER: 0.390 INCHES MINIMUM AND 0.410 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
SURFACE FINISH250.0 MICROINCHES OVERALL
CHAMFER LENGTH0.020 INCHES MINIMUM AND 0.060 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-STD-171 MIL STD SINGLE TREATMENT RESPONSE OVERALL
HOLE ARRANGEMENT STYLEONE END DRILLED
UNDER HEAD LENGTH2.920 INCHES MINIMUM AND 2.960 INCHES MAXIMUM IN
HARDNESS RATING30.0 ROCKWELL C MINIMUM AND 35.0 ROCKWELL C MAXIMUM OVERALL
STYLE DESIGNATORSTRAIGHT
PIN HEAD DIAMETER0.390 INCHES MINIMUM AND 0.410 INCHES MAXIMUM IN
DIAMETER0.230 INCHES MINIMUM AND 0.232 INCHES MAXIMUM IN
HEAD STYLEFLAT CHAMFER
SUBSTITUTES & CROSS-REFERENCES 1
92007A0387Reference document
Same NSN cross-reference
Reference document — Drawing number reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 92007A0387-2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 92007A0387-2?
92007A0387-2 is a PIN,STRAIGHT,HEADED.
What parts can replace 92007A0387-2?
There is 1 known substitute for 92007A0387-2: 92007A0387. Substitute compatibility should be verified for your specific system.
What is the NSN for 92007A0387-2?
92007A0387-2 is cataloged in the U.S. Government catalog under NSN 5315-01-466-5220. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 92007A0387-2

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.