PartsTable
Technical Data Sheet
Download PDF

920073 — DISPLAY UNIT

✓ Government record, cited
— · STORAGE_HDD · 3.5_SATA_HDD
PRODUCT OVERVIEW

920073: DISPLAY UNIT.

The DISPLAY UNIT is a the manufacturer industrial component. Key specifications include head_style: HEXAGON, head_height: 0.150 INCHES MINIMUM AND 0.163 INCHES MAXIMUM IN, thread_class: 2A A, thread_length: 0.594 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN, surface_finish: 63.0 MICROINCHES THREADS, fastener_length: 0.719 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-00-068-0508, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
STORAGE_HDD→ 3.5_SATA_HDD→ 920073
NSN: 5305-00-068-0508
NIINs: 000680508, 013216596, 015389840
FSC: 5305 — Screws
CAGE: 07524 — DOVER PUMPS & PROCESS SOLUTIONS SEGMENT INC DBA BLACKMER DIV BLACKMER (USA)
SPECIFICATIONS
head_styleHEXAGON
head_height0.150 INCHES MINIMUM AND 0.163 INCHES MAXIMUM IN
thread_class2A A
thread_length0.594 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
surface_finish63.0 MICROINCHES THREADS
fastener_length0.719 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
special_featuresWEAPON SYSTEM ESSENTIAL
thread_directionRIGHT-HAND
surface_treatmentZINC AND CHROMATE OVERALL
width_between_flats0.428 INCHES MINIMUM AND 0.438 INCHES MAXIMUM IN
end_item_identificationCALIBRATION
nominal_thread_diameter0.250 INCHES IN
NSN5305-00-068-0508
COMPONENT DIAGRAM
RELEASE LATCH — NL-SAS 7.2K 920073 OEM NL-SAS INTERFACE INTERPOSER SAS drive in SATA tray? Check board compatibility 3.5" (101.6 x 146mm) LFF 3.5" DRIVE | — | NL-SAS 7.2K NL-SAS uses SAS protocol at 7.2K RPM | SAS backplane supports SATA, not reverse Tray generation matters | Gen8 LFF tray differs from Gen10 TITLE LFF 3.5" DRIVE PN 920073 MFR OEM
KEY FEATURES
•
SURFACE FINISH: 63.0 MICROINCHES THREADS
•
HEAD HEIGHT: 0.150 INCHES MINIMUM AND 0.163 INCHES MAXIMUM IN
•
FASTENER LENGTH: 0.719 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: ASTM B633 TY 2 SC 3 ASSN STD SINGLE TREATMENT RESPONSE OVERALL
•
THREAD LENGTH: 0.594 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
•
CRITICALITY CODE JUSTIFICATION: FEAT
•
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD ALL MATERIAL RESPONSES OVERALL
•
NOMINAL THREAD DIAMETER: 0.250 INCHES IN
TECHNICAL CHARACTERISTICS
SURFACE FINISH63.0 MICROINCHES THREADS
HEAD HEIGHT0.150 INCHES MINIMUM AND 0.163 INCHES MAXIMUM IN
FASTENER LENGTH0.719 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONASTM B633 TY 2 SC 3 ASSN STD SINGLE TREATMENT RESPONSE OVERALL
THREAD LENGTH0.594 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
CRITICALITY CODE JUSTIFICATIONFEAT
MATERIAL DOCUMENT AND CLASSIFICATION66 FED STD ALL MATERIAL RESPONSES OVERALL
NOMINAL THREAD DIAMETER0.250 INCHES IN
HEAD STYLEHEXAGON
THREAD DIRECTIONRIGHT-HAND
SUBSTITUTES & CROSS-REFERENCES 10
10082360Reference document
Same NSN cross-reference
Reference document — Informative reference only
MS90728-6Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
803-5959276-06Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
03-2-1333Reference document
Same NSN cross-reference
Reference document — Secondary reference
22489R1Reference document
Same NSN cross-reference
Reference document — Secondary reference
91247A540Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Terminal item — stock exhausted; no further procurementNo demilitarization required
Ready to buy 920073?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 920073?
920073 is a DISPLAY UNIT. It is classified as a STORAGE_HDD (3.5_SATA_HDD).
What parts can replace 920073?
There are 10 known substitutes for 920073: 10082360, MS90728-6, 803-5959276-06 and 7 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 920073?
920073 is cataloged in the U.S. Government catalog under NSN 5305-00-068-0508. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 920073

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.