PartsTable
Technical Data Sheet
Download PDF

920-C90 — PACKING,PREFORMED

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

920-C90: PACKING,PREFORMED.

The PACKING,PREFORMED is a the manufacturer industrial component. Key specifications include special_features: CROSS-SECTIONAL SHAPE STYLE:116 IRREGULAR SHAPE FROM OLD FIIG A03200, peripheral_diameter: 1.711 INCHES NOMINAL IN, center_hole_diameter: 1.461 INCHES MINIMUM AND 1.489 INCHES MAXIMUM IN, cross-sectional_height: 0.114 INCHES MINIMUM AND 0.122 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-106-9711, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
920-C90
NSN: 5330-00-106-9711
FSC: 5330 — Packing and Gasket Materials
CAGE: 11314 — HUTCHINSON SEAL CORPORATION (USA)
SPECIFICATIONS
special_featuresCROSS-SECTIONAL SHAPE STYLE:116 IRREGULAR SHAPE FROM OLD FIIG A03200
peripheral_diameter1.711 INCHES NOMINAL IN
center_hole_diameter1.461 INCHES MINIMUM AND 1.489 INCHES MAXIMUM IN
cross-sectional_height0.114 INCHES MINIMUM AND 0.122 INCHES MAXIMUM IN
NSN5330-00-106-9711
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 920-C90 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.114 INCHES MINIMUM AND 0.122 INCHES MAXIMUM IN
•
PERIPHERAL DIAMETER: 1.711 INCHES NOMINAL IN
•
CENTER HOLE DIAMETER: 1.461 INCHES MINIMUM AND 1.489 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT0.114 INCHES MINIMUM AND 0.122 INCHES MAXIMUM IN
PERIPHERAL DIAMETER1.711 INCHES NOMINAL IN
SPECIAL FEATURESCROSS-SECTIONAL SHAPE STYLE:116 IRREGULAR SHAPE FROM OLD FIIG A03200
CENTER HOLE DIAMETER1.461 INCHES MINIMUM AND 1.489 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES 3
570186Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
AS568-920C90Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
218-5011Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Shelf-life managedAcquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 920-C90?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 920-C90?
920-C90 is a PACKING,PREFORMED.
What parts can replace 920-C90?
There are 3 known substitutes for 920-C90: 570186, AS568-920C90, 218-5011. Substitute compatibility should be verified for your specific system.
What is the NSN for 920-C90?
920-C90 is cataloged in the U.S. Government catalog under NSN 5330-00-106-9711. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 920-C90

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.