PartsTable
Technical Data Sheet
PartsTable / O-RING / 92-9211-052 ITEM 20
92-9211-052 ITEM 20 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC, temp_rating: -30.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF, hardness_rating: 70.0 SHORE DUROMETER A NOMINAL, outside_diameter: 0.557 INCHES MINIMUM AND 0.579 INCHES MAXIMUM IN, center_hole_diameter: 0.357 INCHES MINIMUM AND 0.367 INCHES MAXIMUM IN, elongation_percentage: 331 MAXIMUM. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-168-1898, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
92-9211-052 ITEM 20
NSN: 5331-00-168-1898
FSC: 5331 — O-RING
CAGE: 0BHF9 — PRIME TECHNOLOGY LLC (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC
temp_rating-30.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
hardness_rating70.0 SHORE DUROMETER A NOMINAL
outside_diameter0.557 INCHES MINIMUM AND 0.579 INCHES MAXIMUM IN
center_hole_diameter0.357 INCHES MINIMUM AND 0.367 INCHES MAXIMUM IN
elongation_percentage331 MAXIMUM
cross-sectional_height0.103 INCHES NOMINAL IN
NSN5331-00-168-1898
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 92-9211-052 ITEM 20 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HARDNESS RATING: 70.0 SHORE DUROMETER A NOMINAL
•
CENTER HOLE DIAMETER: 0.357 INCHES MINIMUM AND 0.367 INCHES MAXIMUM IN
•
ELONGATION PERCENTAGE: 331 MAXIMUM
•
MATERIAL: RUBBER SYNTHETIC
•
TEMP RATING: -30.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
•
CROSS-SECTIONAL HEIGHT: 0.103 INCHES NOMINAL IN
•
OUTSIDE DIAMETER: 0.557 INCHES MINIMUM AND 0.579 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
HARDNESS RATING70.0 SHORE DUROMETER A NOMINAL
CENTER HOLE DIAMETER0.357 INCHES MINIMUM AND 0.367 INCHES MAXIMUM IN
ELONGATION PERCENTAGE331 MAXIMUM
MATERIALRUBBER SYNTHETIC
TEMP RATING-30.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
CROSS-SECTIONAL HEIGHT0.103 INCHES NOMINAL IN
OUTSIDE DIAMETER0.557 INCHES MINIMUM AND 0.579 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 16
7222-110-569Interchangeable
interchangeable cross-reference
interchangeable
AS568-110Interchangeable
interchangeable cross-reference
interchangeable
2438671Interchangeable
interchangeable cross-reference
interchangeable
349782Interchangeable
interchangeable cross-reference
interchangeable
5330-227-2Interchangeable
interchangeable cross-reference
interchangeable
6AND8BInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 92-9211-052 ITEM 20?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 92-9211-052 ITEM 20?
92-9211-052 ITEM 20 is a O-RING.
What parts can replace 92-9211-052 ITEM 20?
There are 16 known substitutes for 92-9211-052 ITEM 20: 7222-110-569, AS568-110, 2438671 and 13 more. Substitute compatibility should be verified for your specific system.
Is 92-9211-052 ITEM 20 still available?
92-9211-052 ITEM 20 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 92-9211-052 ITEM 20

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026