PartsTable
Technical Data Sheet
PartsTable / MRO / 92-46
92-46 ✓ Verified by PartsTable
Multibrackets · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

M Pro Series Enclosure 85" Floor to Ceiling Large is a signage solution - ready to be installed.<br><br>The professional Pro Series A/V line from Multibrackets was designed with the installer in mind. Modular, easy to configure, quick to install and simple to maintain. Developed together with installers we added close to unlimited flexibility and versatility.

Based on the Pro Series ultra-flexible aluminum rail it is completely modular and has built in cable management throughout the entire solution to quicken installation and create an esthetic result worth the public eye.<br><br>With its modular construction installers can tailor the M Pro Series Enclosure 85" Floor to Ceiling Large with the clients need in mind. Possibilities to change, update and reconfigure its design and if ideas change over time Pro Series can follow.<br><br>The M Pro Series Enclosure 85" Floor to Ceiling Large creates a rock steady screen display solution aimed for the retail store, mall or any other public are This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-120-1735, indicating validated use in U.S. government and defense logistics supply chains.

WHERE IT FITS
MRO→ MRO_GENERAL→ 92-46
NSN: 3110-00-120-1735
FSC: 3110
CAGE: 79141 — VAN NORMAN MACHINE CO INC SUB OF WINVAN INC (USA)
SPECIFICATIONS
power_sourceEXTERNAL
inclosure_typeENCASED
special_featuresCONSISTS OF 1 LARGE WATER RESISTANT DUFFLE BAG,
terminal_locationBACK
component_quantity19
frequency_in_hertz50.0 OR 60.0
operating_temp_range+50.0 TO 95.0 FAHRENHEIT DEGF
maximum_overall_width9.600 INCHES IN
maximum_overall_height7.900 INCHES IN
maximum_overall_length19.100 INCHES IN
maximum_voltage_rating_in_volts100.0 AC OR 240.0 AC
NSN3110-00-120-1735
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 92-46 · Multibrackets ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LUBRICATION MATERIAL: GREASE
•
OVERALL OUTSIDE DIAMETER: 47.0 MILLIMETERS NOMINAL MM
•
BORE SHAPE: STRAIGHT
•
BEARING SEAL TYPE: CONTACT
•
INNER RING WIDTH: 0.6990 INCHES NOMINAL IN
•
OUTER RING WIDTH: 0.5510 INCHES NOMINAL IN
•
SURFACE FINISH: GROUND
•
LOAD DIRECTION: RADIAL
TECHNICAL CHARACTERISTICS (FLIS)
LUBRICATION MATERIALGREASE
OVERALL OUTSIDE DIAMETER47.0 MILLIMETERS NOMINAL MM
BORE SHAPESTRAIGHT
BEARING SEAL TYPECONTACT
INNER RING WIDTH0.6990 INCHES NOMINAL IN
OUTER RING WIDTH0.5510 INCHES NOMINAL IN
SURFACE FINISHGROUND
LOAD DIRECTIONRADIAL
MATERIALSTEEL BALL
MATERIALRUBBER SYNTHETIC SEAL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 10
MX148GInterchangeable
interchangeable cross-reference
interchangeable
MILR11461Interchangeable
interchangeable cross-reference
interchangeable
9246Interchangeable
interchangeable cross-reference
interchangeable
20Interchangeable
2 x Intel Xeon E5-2650 v4 2.2GHz,30M Cache,9.60GT/s QPI,Turbo,HT,12C/24T (105W) Max Mem 2400MHz
interchangeable
X1086T43Interchangeable
interchangeable cross-reference
interchangeable
D10Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 92-46?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 92-46?
92-46 is a TRANSFORMER,AUDIO FREQUENCY manufactured by Multibrackets. It is classified as a MRO (MRO_GENERAL).
What parts can replace 92-46?
There are 10 known substitutes for 92-46: MX148G, MILR11461, 9246 and 7 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 92-46?
92-46 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-120-1735. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 92-46

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026