PartsTable
Technical Data Sheet
Download PDF

9199006 — WHEEL,SOLID,NONMETALLIC

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

9199006: WHEEL,SOLID,NONMETALLIC.

The WHEEL,SOLID,NONMETALLIC is a the manufacturer industrial component. Key specifications include material: RUBBER, tread_width: 0.969 INCHES NOMINAL IN, overall_width: 1.016 INCHES NOMINAL IN, overall_length: 1.016 INCHES NOMINAL IN, outside_diameter: 2.000 INCHES NOMINAL IN, axle_recess_diameter: 0.258 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-738-1448, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
9199006
NSN: 5340-00-738-1448
FSC: 5340 — Hardware, Commercial
CAGE: 18876 — US ARMY AVIATION AND MISSILE COMMAND (USA)
SPECIFICATIONS
materialRUBBER
tread_width0.969 INCHES NOMINAL IN
overall_width1.016 INCHES NOMINAL IN
overall_length1.016 INCHES NOMINAL IN
outside_diameter2.000 INCHES NOMINAL IN
axle_recess_diameter0.258 INCHES NOMINAL IN
NSN5340-00-738-1448
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 9199006 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
AXLE RECESS DIAMETER: 0.258 INCHES NOMINAL IN
•
TREAD WIDTH: 0.969 INCHES NOMINAL IN
•
OUTSIDE DIAMETER: 2.000 INCHES NOMINAL IN
•
MATERIAL: RUBBER
TECHNICAL CHARACTERISTICS
AXLE RECESS DIAMETER0.258 INCHES NOMINAL IN
TREAD WIDTH0.969 INCHES NOMINAL IN
OVERALL LENGTH1.016 INCHES NOMINAL IN
OVERALL WIDTH1.016 INCHES NOMINAL IN
OUTSIDE DIAMETER2.000 INCHES NOMINAL IN
MATERIALRUBBER
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 1
KP2X1Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 9199006?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 9199006?
9199006 is a WHEEL,SOLID,NONMETALLIC.
What parts can replace 9199006?
There is 1 known substitute for 9199006: KP2X1. Substitute compatibility should be verified for your specific system.
What is the NSN for 9199006?
9199006 is cataloged in the U.S. Government catalog under NSN 5340-00-738-1448. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 9199006