PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 9194068-25
9194068-25 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The PLUG,VENT is a the manufacturer industrial component. Key specifications include length: 1.360 INCHES NOMINAL IN, material: ALUMINUM ALLOY, thread_class: 2A A, thread_length: 0.500 INCHES NOMINAL IN, inside_diameter: 0.440 INCHES NOMINAL IN, vent_hole_shape: ROUND. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-621-1322, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
9194068-25
NSN: 5340-00-621-1322
FSC: 5340
CAGE: 18876 — US ARMY AVIATION AND MISSILE COMMAND (USA)
SPECIFICATIONS
length1.360 INCHES NOMINAL IN
materialALUMINUM ALLOY
thread_class2A A
thread_length0.500 INCHES NOMINAL IN
inside_diameter0.440 INCHES NOMINAL IN
vent_hole_shapeROUND
outside_diameter1.250 INCHES NOMINAL IN
surface_treatmentANODIZE
vent_hole_diameter0.188 INCHES NOMINAL IN
vent_hole_quantity4
end_connection_typeTHREADED
thread_size_and_series/type_designator1.250 UNEF
NSN5340-00-621-1322
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 9194068-25 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: ALUMINUM ALLOY
•
VENT HOLE DIAMETER: 0.188 INCHES NOMINAL IN
•
SURFACE TREATMENT: ANODIZE
•
VENT HOLE QUANTITY: 4
•
THREAD LENGTH: 0.500 INCHES NOMINAL IN
•
OUTSIDE DIAMETER: 1.250 INCHES NOMINAL IN
•
THREAD SIZE AND SERIES/TYPE DESIGNATOR: 1.250 UNEF
•
INSIDE DIAMETER: 0.440 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALALUMINUM ALLOY
VENT HOLE DIAMETER0.188 INCHES NOMINAL IN
SURFACE TREATMENTANODIZE
VENT HOLE QUANTITY4
THREAD LENGTH0.500 INCHES NOMINAL IN
OUTSIDE DIAMETER1.250 INCHES NOMINAL IN
THREAD SIZE AND SERIES/TYPE DESIGNATOR1.250 UNEF
INSIDE DIAMETER0.440 INCHES NOMINAL IN
VENT HOLE SHAPEROUND
LENGTH1.360 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
NDC00003-0256-10Upgraded Successor
successor cross-reference
successor
0003-0256-10Upgraded Successor
successor cross-reference
successor
950 37/64Interchangeable
interchangeable cross-reference
interchangeable
10587Interchangeable
interchangeable cross-reference
interchangeable
2510 37/64Interchangeable
interchangeable cross-reference
interchangeable
P6KE6.8Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 9194068-25?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 9194068-25?
9194068-25 is a PLUG,VENT.
What parts can replace 9194068-25?
There are 8 known substitutes for 9194068-25: NDC00003-0256-10, 0003-0256-10, 950 37/64 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 9194068-25?
9194068-25 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-621-1322. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 9194068-25

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026