PartsTable
Technical Data Sheet
Download PDF

91925 — SPROCKET WHEEL

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

91925: SPROCKET WHEEL.

The SPROCKET WHEEL is a the manufacturer industrial component. Key specifications include part_name_assigned_by_controlling_agency: PUSH NUT. This part is cataloged in the U.S.

Government catalog under NSN 5305-01-132-1067, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
91925
NSN: 5305-01-132-1067
NIINs: 011321067, 012835122, 013140469, 015800350
FSC: 5305 — Screws
CAGE: 15786 — GENERAL INSTRUMENT CORP DALMO VICTOR DIV (USA)
SPECIFICATIONS
part_name_assigned_by_controlling_agencyPUSH NUT
NSN5305-01-132-1067
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 91925 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FASTENER LENGTH: 0.360 INCHES NOMINAL IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416 TY 1 CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE FASTENER
•
MATERIAL ACCOMMODATED THICKNESS: 0.078 INCHES MINIMUM AND 0.100 INCHES MAXIMUM IN
•
THREAD LENGTH: 0.233 INCHES NOMINAL IN
•
HARDNESS RATING: 34.0 ROCKWELL C MINIMUM AND 38.0 ROCKWELL C MAXIMUM OVERALL
•
NOMINAL THREAD DIAMETER: 0.112 INCHES IN
•
HEAD STYLE: FLAT COUNTERSUNK
TECHNICAL CHARACTERISTICS
FASTENER LENGTH0.360 INCHES NOMINAL IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416 TY 1 CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE FASTENER
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416 TY 1 CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE STAND-OFF
MATERIAL ACCOMMODATED THICKNESS0.078 INCHES MINIMUM AND 0.100 INCHES MAXIMUM IN
THREAD LENGTH0.233 INCHES NOMINAL IN
HARDNESS RATING34.0 ROCKWELL C MINIMUM AND 38.0 ROCKWELL C MAXIMUM OVERALL
NOMINAL THREAD DIAMETER0.112 INCHES IN
HEAD STYLEFLAT COUNTERSUNK
THREAD DIRECTIONRIGHT-HAND
SURFACE TREATMENTCADMIUM STAND-OFF
SUBSTITUTES & CROSS-REFERENCES 3
DPC7900-4-A-1.5Reference document
Same NSN cross-reference
Reference document — Secondary reference
91925-12Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
FT1500-4-1-1.5Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 91925?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 91925?
91925 is a SPROCKET WHEEL.
What parts can replace 91925?
There are 3 known substitutes for 91925: DPC7900-4-A-1.5, 91925-12, FT1500-4-1-1.5. Substitute compatibility should be verified for your specific system.
What is the NSN for 91925?
91925 is cataloged in the U.S. Government catalog under NSN 5305-01-132-1067. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 91925

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.