PartsTable
Technical Data Sheet
Download PDF

9188039 — BRACKET,DOUBLE ANGLE

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

9188039: BRACKET,DOUBLE ANGLE.

The BRACKET,DOUBLE ANGLE is a the manufacturer industrial component. Key specifications include heat_treatment: H-14 STRAIN HARDENED, 1/2 HARD, first_leg_angle: 90.0 DEGREES NOMINAL, first_leg_style: SQUARE, first_leg_width: 0.480 INCHES MINIMUM AND 0.520 INCHES MAXIMUM IN, first_leg_length: 0.602 INCHES MINIMUM AND 0.642 INCHES MAXIMUM IN, second_leg_angle: 90.0 DEGREES NOMINAL. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-788-2894, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
9188039
NSN: 5340-00-788-2894
FSC: 5340 — Hardware, Commercial
CAGE: 18876 — US ARMY AVIATION AND MISSILE COMMAND (USA)
SPECIFICATIONS
heat_treatmentH-14 STRAIN HARDENED, 1/2 HARD
first_leg_angle90.0 DEGREES NOMINAL
first_leg_styleSQUARE
first_leg_width0.480 INCHES MINIMUM AND 0.520 INCHES MAXIMUM IN
first_leg_length0.602 INCHES MINIMUM AND 0.642 INCHES MAXIMUM IN
second_leg_angle90.0 DEGREES NOMINAL
second_leg_styleSQUARE
second_leg_width0.480 INCHES MINIMUM AND 0.520 INCHES MAXIMUM IN
special_featuresFURNISHED WITH ONE NUT,SELF-LOCKING AND ONE RUBBER STRIP
style_designatorDOUBLE ANGLE
second_leg_length4.290 INCHES MINIMUM AND 4.330 INCHES MAXIMUM IN
fabrication_methodSTAMPED
NSN5340-00-788-2894
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 9188039 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH: 0.225 INCHES MINIMUM AND 0.265 INCHES MAXIMUM IN
•
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH: 0.230 INCHES MINIMUM AND 0.270 INCHES MAXIMUM IN
•
FIRST LEG HOLE DIAMETER: 0.268 INCHES MINIMUM AND 0.271 INCHES MAXIMUM IN
•
FIRST LEG ANGLE: 90.0 DEGREES NOMINAL
•
CENTER SECTION THICKNESS: 0.059 INCHES MINIMUM AND 0.065 INCHES MAXIMUM IN
•
SECOND LEG ANGLE: 90.0 DEGREES NOMINAL
•
SECOND LEG WIDTH: 0.480 INCHES MINIMUM AND 0.520 INCHES MAXIMUM IN
•
SECOND LEG LENGTH: 4.290 INCHES MINIMUM AND 4.330 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH0.225 INCHES MINIMUM AND 0.265 INCHES MAXIMUM IN
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH0.230 INCHES MINIMUM AND 0.270 INCHES MAXIMUM IN
FIRST LEG HOLE DIAMETER0.268 INCHES MINIMUM AND 0.271 INCHES MAXIMUM IN
FIRST LEG ANGLE90.0 DEGREES NOMINAL
CENTER SECTION THICKNESS0.059 INCHES MINIMUM AND 0.065 INCHES MAXIMUM IN
SECOND LEG ANGLE90.0 DEGREES NOMINAL
SECOND LEG WIDTH0.480 INCHES MINIMUM AND 0.520 INCHES MAXIMUM IN
SECOND LEG LENGTH4.290 INCHES MINIMUM AND 4.330 INCHES MAXIMUM IN
SECOND LEG SLOT WIDTH0.194 INCHES MINIMUM AND 0.204 INCHES MAXIMUM IN
FIRST LEG HOLE ARRANGEMENT STYLEONE HOLE
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 9188039?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 9188039?
9188039 is a BRACKET,DOUBLE ANGLE.
What is the NSN for 9188039?
9188039 is cataloged in the U.S. Government catalog under NSN 5340-00-788-2894. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 9188039