PartsTable
Technical Data Sheet
Download PDF

9180-7 — CONE AND ROLLERS,TAPERED ROLLER

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

9180-7: CONE AND ROLLERS,TAPERED ROLLER.

CONE AND ROLLERS,TAPERED ROLLER. Key specifications include body_width: 2.625 INCHES NOMINAL IN, body_height: 3.375 INCHES NOMINAL IN, body_length: 2.875 INCHES NOMINAL IN, inclosure_type: PARTIALLY INCLOSED, DOUBLE SHELL, mounting_method: FLANGE AND SLOT SINGLE GROUP, frequency_rating: 50.0 HERTZ MINIMUM AND 400.0 HERTZ MAXIMUM SINGLE COMPONENT. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-100-0269, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
9180-7
NSN: 3110-00-100-0269
NIINs: 001000269, 006205819, 009439050, 012995199
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 34640 — LA CROSSE TRAILER CORP (USA)
SPECIFICATIONS
body_width2.625 INCHES NOMINAL IN
body_height3.375 INCHES NOMINAL IN
body_length2.875 INCHES NOMINAL IN
inclosure_typePARTIALLY INCLOSED, DOUBLE SHELL
mounting_methodFLANGE AND SLOT SINGLE GROUP
frequency_rating50.0 HERTZ MINIMUM AND 400.0 HERTZ MAXIMUM SINGLE COMPONENT
special_featuresFIRST AND SECOND PRIMARY WINDING TAPS USED TO SELECT DIFFERENT SECONDARY VOLTAGES
mounting_slot_width0.188 INCHES NOMINAL SINGLE GROUP IN
winding_power_rating97.2 VOLTS-AMPERES SINGLE COMPONENT ALL SECONDARY
reliability_indicatorNOT ESTABLISHED
winding_operating_current4.0 AMPERES AC MAXIMUM SINGLE COMPONENT THIRD SECONDARY
winding_operating_voltage12.00 AC VOLTS MINIMUM AND 29.30 AC VOLTS MAXIMUM SINGLE COMPONENT ALL SECONDARY
NSN3110-00-100-0269
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 9180-7 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
SUBSTITUTES & CROSS-REFERENCES 6
604393Reference document
Same NSN cross-reference
Reference document — Secondary reference
SH528Reference document
Same NSN cross-reference
Reference document — Secondary reference
528Reference document
Same NSN cross-reference
Reference document — Secondary reference
T1-115Reference document
Same NSN cross-reference
Reference document — Secondary reference
23268HReference document
Same NSN cross-reference
Reference document — Secondary reference
2D235Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 9180-7?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 9180-7?
9180-7 is a CONE AND ROLLERS,TAPERED ROLLER.
What parts can replace 9180-7?
There are 6 known substitutes for 9180-7: 604393, SH528, 528 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 9180-7?
9180-7 is cataloged in the U.S. Government catalog under NSN 3110-00-100-0269. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 9180-7