PartsTable / COMPONENT / 917AS6359
917AS6359
✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The CLAMP,SYNCHRO is a the manufacturer industrial component. Key specifications include width: 0.213 INCHES MINIMUM AND 0.228 INCHES MAXIMUM IN, height: 0.365 INCHES MAXIMUM IN, length: 0.260 INCHES MINIMUM AND 0.265 INCHES MAXIMUM IN, material: STEEL COMP 316 AND PLASTIC POLYHEXAMETHYLENE ADIPAMIDE, hole_diameter: 0.086 INCHES NOMINAL IN, material_document_and_classification: MIL-M-20693,TYPE 1 MIL SPEC 2ND MATERIAL RESPONSE. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-055-1899, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
917AS6359
NSN: 5340-00-055-1899 FSC: 5340 CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
width 0.213 INCHES MINIMUM AND 0.228 INCHES MAXIMUM IN height 0.365 INCHES MAXIMUM IN length 0.260 INCHES MINIMUM AND 0.265 INCHES MAXIMUM IN material STEEL COMP 316 AND PLASTIC POLYHEXAMETHYLENE ADIPAMIDE hole_diameter 0.086 INCHES NOMINAL IN material_document_and_classification MIL-M-20693,TYPE 1 MIL SPEC 2ND MATERIAL RESPONSE NSN 5340-00-055-1899
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION
ID: —
CROSS-SECTION
CS: —
SPECIFICATION
Material: —
Durometer: —
Temp: —
PN: 917AS6359
MFR: OEM
⚠ VERIFY BEFORE ORDERING
Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade.
Chemical incompatibility causes swelling, brittleness, or rapid degradation
✓ BROKER TIP
Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure.
Standard durometer is 70A — verify if application requires different hardness
PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
• WIDTH: 0.213 INCHES MINIMUM AND 0.228 INCHES MAXIMUM IN
• HEIGHT: 0.365 INCHES MAXIMUM IN
• HOLE DIAMETER: 0.086 INCHES NOMINAL IN
• MATERIAL: STEEL COMP 316 AND PLASTIC POLYHEXAMETHYLENE ADIPAMIDE
• LENGTH: 0.260 INCHES MINIMUM AND 0.265 INCHES MAXIMUM IN
• MATERIAL DOCUMENT AND CLASSIFICATION: MIL-M-20693,TYPE 1 MIL SPEC 2ND MATERIAL RESPONSE
TECHNICAL CHARACTERISTICS (FLIS)
WIDTH 0.213 INCHES MINIMUM AND 0.228 INCHES MAXIMUM IN HEIGHT 0.365 INCHES MAXIMUM IN HOLE DIAMETER 0.086 INCHES NOMINAL IN MATERIAL STEEL COMP 316 AND PLASTIC POLYHEXAMETHYLENE ADIPAMIDE LENGTH 0.260 INCHES MINIMUM AND 0.265 INCHES MAXIMUM IN MATERIAL DOCUMENT AND CLASSIFICATION MIL-M-20693,TYPE 1 MIL SPEC 2ND MATERIAL RESPONSE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 15
CE476 Interchangeable interchangeable cross-reference
interchangeable
L323 Interchangeable interchangeable cross-reference
interchangeable
827857 Interchangeable interchangeable cross-reference
interchangeable
5866 Interchangeable interchangeable cross-reference
interchangeable
00044 Interchangeable interchangeable cross-reference
interchangeable
SQ4 Interchangeable interchangeable cross-reference
interchangeable
LIFECYCLE
Status CANCELLED
Availability —
RoHS Compliant EAR99 Not HAZMAT
Ready to buy 917AS6359?
Compare prices from verified sellers on eBay
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 917AS6359?
917AS6359 is a CLAMP,SYNCHRO.
What parts can replace 917AS6359?
There are 15 known substitutes for 917AS6359: CE476, L323, 827857 and 12 more. Substitute compatibility should be verified for your specific system.
Is 917AS6359 still available?
917AS6359 is currently cancelled.
Request a Quote — 917AS6359