PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 917965-6
917965-6 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The RECTIFIER,METALLIC is a the manufacturer industrial component. Key specifications include length_under_shoulder: 0.875 INCHES NOMINAL IN, open_end_inside_diameter: 1.402 INCHES NOMINAL IN, closed_end_overall_diameter: 1.312 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-290-7249, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
917965-6
NSN: 5340-00-290-7249
FSC: 5340
CAGE: 89926 — NEW HOLLAND CONSTRUCTION (USA)
SPECIFICATIONS
length_under_shoulder0.875 INCHES NOMINAL IN
open_end_inside_diameter1.402 INCHES NOMINAL IN
closed_end_overall_diameter1.312 INCHES NOMINAL IN
NSN5340-00-290-7249
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 917965-6 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LENGTH UNDER SHOULDER: 0.875 INCHES NOMINAL IN
•
CLOSED END OVERALL DIAMETER: 1.312 INCHES NOMINAL IN
•
OPEN END INSIDE DIAMETER: 1.402 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
LENGTH UNDER SHOULDER0.875 INCHES NOMINAL IN
CLOSED END OVERALL DIAMETER1.312 INCHES NOMINAL IN
OPEN END INSIDE DIAMETER1.402 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 31
MILC52078Upgraded Successor
successor cross-reference
successor
22SUpgraded Successor
successor cross-reference
successor
M5501/7-F38Upgraded Successor
successor cross-reference
successor
M5501/1-R6Upgraded Successor
successor cross-reference
successor
MILC5501Upgraded Successor
successor cross-reference
successor
MIL-C-5501/1Upgraded Successor
successor cross-reference
successor
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 917965-6?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 917965-6?
917965-6 is a RECTIFIER,METALLIC.
What parts can replace 917965-6?
There are 31 known substitutes for 917965-6: MILC52078, 22S, M5501/7-F38 and 28 more. Substitute compatibility should be verified for your specific system.
Is 917965-6 still available?
917965-6 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 917965-6

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026