PartsTable
Technical Data Sheet
Download PDF

9176193 — SWITCH,LEVER

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

9176193: SWITCH,LEVER.

The SWITCH,LEVER is a the manufacturer industrial component. Key specifications include diameter: 0.281 INCHES NOMINAL IN, material: RUBBER SYNTHETIC CUSHION, body_style: HOLE MOUNTED, body_height: 2.063 INCHES NOMINAL IN, body_length: 1.875 INCHES NOMINAL IN, overall_width: 0.620 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-420-9733, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
9176193
NSN: 5340-00-420-9733
NIINs: 004209733, 008764041
FSC: 5340 — Hardware, Commercial
CAGE: 30379 — EUCLID INC (USA)
SPECIFICATIONS
diameter0.281 INCHES NOMINAL IN
materialRUBBER SYNTHETIC CUSHION
body_styleHOLE MOUNTED
body_height2.063 INCHES NOMINAL IN
body_length1.875 INCHES NOMINAL IN
overall_width0.620 INCHES NOMINAL IN
actuator_styleROUND
inclosure_typeUNINCLOSED
actuator_height1.625 INCHES NOMINAL IN
style_designatorSINGLE LOOP
tongue_hole_typeROUND, UNTHREADED
actuator_diameter0.250 INCHES NOMINAL IN
NSN5340-00-420-9733
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 9176193 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: SINGLE LOOP
•
DIAMETER: 0.281 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.050 INCHES NOMINAL IN
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 1.970 INCHES NOMINAL IN
•
TONGUE HOLE TYPE: ROUND, UNTHREADED
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 1.660 INCHES NOMINAL IN
•
MATERIAL: STEEL BAND
TECHNICAL CHARACTERISTICS
STYLE DESIGNATORSINGLE LOOP
DIAMETER0.281 INCHES NOMINAL IN
OVERALL WIDTH0.620 INCHES NOMINAL IN
MATERIAL THICKNESS0.050 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END1.970 INCHES NOMINAL IN
TONGUE HOLE TYPEROUND, UNTHREADED
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE1.660 INCHES NOMINAL IN
MATERIALSTEEL BAND
MATERIALRUBBER SYNTHETIC CUSHION
LOOP INSIDE DIAMETER2.250 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 9176193?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 9176193?
9176193 is a SWITCH,LEVER.
What is the NSN for 9176193?
9176193 is cataloged in the U.S. Government catalog under NSN 5340-00-420-9733. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 9176193

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.