PartsTable
Technical Data Sheet
Download PDF

91755A225 — WASHER,LOCK

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

91755A225: WASHER,LOCK.

The WASHER,LOCK is a the manufacturer industrial component. Key specifications include material: PLASTIC OVERALL, hole_diameter: 0.234 INCHES NOMINAL IN, outside_diameter: 0.593 INCHES NOMINAL IN, end_item_identification: 2355-01-539-3589;LIGHT ARMORED VEHICLE, part_name_assigned_by_controlling_agency: WASHER,LOCKING. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-597-1479, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
91755A225
NSN: 5310-01-597-1479
FSC: 5310 — Nuts and Washers
CAGE: 39428 — MCMASTER-CARR SUPPLY CO (USA)
SPECIFICATIONS
materialPLASTIC OVERALL
hole_diameter0.234 INCHES NOMINAL IN
outside_diameter0.593 INCHES NOMINAL IN
internal_key_quantity4
end_item_identification2355-01-539-3589;LIGHT ARMORED VEHICLE
part_name_assigned_by_controlling_agencyWASHER,LOCKING
NSN5310-01-597-1479
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 91755A225 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OUTSIDE DIAMETER: 0.593 INCHES NOMINAL IN
•
MATERIAL: PLASTIC OVERALL
•
INTERNAL KEY QUANTITY: 4
•
HOLE DIAMETER: 0.234 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
OUTSIDE DIAMETER0.593 INCHES NOMINAL IN
SPECIAL FEATURESWASHER THICKNESS MAY VARY FROM 0.050 INCH TO 0.070 INCH IN THICKNESS;FOR SCREW SIZE: 1/4 INCH,M6;FINISH: PLAIN;PLASTIC TYPE: NYLON 6/6;COLOR: OFF-WHITE;OPERATING TEMPERATURE RANGE: -40 DEGREE FAHRENHEIT TO +185 DEGREE FAHRENHEIT;RETAINING TYPE: GRIP IN
PART NAME ASSIGNED BY CONTROLLING AGENCYWASHER,LOCKING
END ITEM IDENTIFICATION2355-01-539-3589;LIGHT ARMORED VEHICLE
MATERIALPLASTIC OVERALL
INTERNAL KEY QUANTITY4
HOLE DIAMETER0.234 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 91755A225?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 91755A225?
91755A225 is a WASHER,LOCK.
What is the NSN for 91755A225?
91755A225 is cataloged in the U.S. Government catalog under NSN 5310-01-597-1479. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 91755A225