PartsTable
Technical Data Sheet
Download PDF

9174562 — STAY,LOCKING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

9174562: STAY,LOCKING.

The STAY,LOCKING is a the manufacturer industrial component. Key specifications include material: STEEL COMP 302, overall_width: 0.656 INCHES NOMINAL IN, overall_length: 8.000 INCHES NOMINAL IN, style_designator: FRICTION TYPE, features_provided: RETAINING LUG AND NOTCHED SLIDE, surface_treatment: PASSIVATE. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-781-6219, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
9174562
NSN: 5340-00-781-6219
FSC: 5340 — Hardware, Commercial
CAGE: 18876 — US ARMY AVIATION AND MISSILE COMMAND (USA)
SPECIFICATIONS
materialSTEEL COMP 302
overall_width0.656 INCHES NOMINAL IN
overall_length8.000 INCHES NOMINAL IN
offset_quantity1
style_designatorFRICTION TYPE
features_providedRETAINING LUG AND NOTCHED SLIDE
surface_treatmentPASSIVATE
material_thickness0.115 INCHES MINIMUM AND 0.135 INCHES MAXIMUM IN
operational_directionLEFT-HAND
mounting_hole_diameter0.312 INCHES MINIMUM AND 0.316 INCHES MAXIMUM IN
material_document_and_classificationMIL-S-7720 COND A MIL SPEC SINGLE MATERIAL RESPONSE
NSN5340-00-781-6219
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 9174562 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OPERATIONAL DIRECTION: LEFT-HAND
•
STYLE DESIGNATOR: FRICTION TYPE
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-7720 COND A MIL SPEC SINGLE MATERIAL RESPONSE
•
MOUNTING HOLE DIAMETER: 0.312 INCHES MINIMUM AND 0.316 INCHES MAXIMUM IN
•
OFFSET QUANTITY: 1
•
FEATURES PROVIDED: RETAINING LUG AND NOTCHED SLIDE
TECHNICAL CHARACTERISTICS
OPERATIONAL DIRECTIONLEFT-HAND
STYLE DESIGNATORFRICTION TYPE
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-7720 COND A MIL SPEC SINGLE MATERIAL RESPONSE
MOUNTING HOLE DIAMETER0.312 INCHES MINIMUM AND 0.316 INCHES MAXIMUM IN
OVERALL LENGTH8.000 INCHES NOMINAL IN
OVERALL WIDTH0.656 INCHES NOMINAL IN
OFFSET QUANTITY1
FEATURES PROVIDEDRETAINING LUG AND NOTCHED SLIDE
MATERIAL THICKNESS0.115 INCHES MINIMUM AND 0.135 INCHES MAXIMUM IN
SURFACE TREATMENTPASSIVATE
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 1
231MS025P1Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 9174562?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 9174562?
9174562 is a STAY,LOCKING.
What parts can replace 9174562?
There is 1 known substitute for 9174562: 231MS025P1. Substitute compatibility should be verified for your specific system.
What is the NSN for 9174562?
9174562 is cataloged in the U.S. Government catalog under NSN 5340-00-781-6219. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 9174562