PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 91717PC29
91717PC29 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: LEATHER SEALING ELEMENT, case_style: SQUARE, seal_width: 0.469 INCHES NOMINAL IN, outside_diameter: 3.881 INCHES NOMINAL IN, surface_treatment: PLASTIC CASE, housing_bore_diameter: 3.876 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-154-8353, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
91717PC29
NSN: 5330-00-154-8353
FSC: 5330
CAGE: 21444 — REXNORD INDUSTRIES LLC (USA)
SPECIFICATIONS
materialLEATHER SEALING ELEMENT
case_styleSQUARE
seal_width0.469 INCHES NOMINAL IN
outside_diameter3.881 INCHES NOMINAL IN
surface_treatmentPLASTIC CASE
housing_bore_diameter3.876 INCHES NOMINAL IN
sealing_element_styleANGULAR
accommodated_shaft_diameter2.812 INCHES NOMINAL IN
accommodated_shaft_maximum_rated_speed2000 FEET PER MINUTE FT
NSN5330-00-154-8353
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 91717PC29 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OUTSIDE DIAMETER: 3.881 INCHES NOMINAL IN
•
SEALING ELEMENT STYLE: ANGULAR
•
ACCOMMODATED SHAFT DIAMETER: 2.812 INCHES NOMINAL IN
•
ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 2000 FEET PER MINUTE FT
•
SURFACE TREATMENT: PLASTIC CASE
•
CASE STYLE: SQUARE
•
MATERIAL: STEEL CASE
•
SEAL WIDTH: 0.469 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
OUTSIDE DIAMETER3.881 INCHES NOMINAL IN
SEALING ELEMENT STYLEANGULAR
ACCOMMODATED SHAFT DIAMETER2.812 INCHES NOMINAL IN
ACCOMMODATED SHAFT MAXIMUM RATED SPEED2000 FEET PER MINUTE FT
SURFACE TREATMENTPLASTIC CASE
CASE STYLESQUARE
MATERIALSTEEL CASE
SEAL WIDTH0.469 INCHES NOMINAL IN
MATERIALLEATHER SEALING ELEMENT
HOUSING BORE DIAMETER3.876 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 24
S80138Interchangeable
interchangeable cross-reference
interchangeable
55010Interchangeable
interchangeable cross-reference
interchangeable
2382573-3Interchangeable
interchangeable cross-reference
interchangeable
0915771Interchangeable
interchangeable cross-reference
interchangeable
02261-0284-22Interchangeable
interchangeable cross-reference
interchangeable
18026Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 91717PC29?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 91717PC29?
91717PC29 is a SEAL,PLAIN ENCASED.
What parts can replace 91717PC29?
There are 24 known substitutes for 91717PC29: S80138, 55010, 2382573-3 and 21 more. Substitute compatibility should be verified for your specific system.
Is 91717PC29 still available?
91717PC29 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 91717PC29

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026