PartsTable
Technical Data Sheet
Download PDF

9167762-1 — VALVE,CHECK

✓ Government record, cited
— · GATE VALVE
PRODUCT OVERVIEW

9167762-1: VALVE,CHECK.

The VALVE,CHECK is a the manufacturer industrial component. Key specifications include material: STEEL COMP 316 BODY, seat_angle: 37.0 DEGREES ALL ENDS, thread_class: 3A ALL ENDS A, connection_type: THREADED EXTERNAL TUBE ALL ENDS, connection_style: FLARED (TUBE) ALL ENDS, style_designator: STRAIGHT THRU. This part is cataloged in the U.S.

Government catalog under NSN 4820-01-424-6205, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
9167762-1
NSN: 4820-01-424-6205
FSC: 4820 — Valves, Nonpowered
CAGE: 98750 — SAN ANTONIO AIR LOGISTICS CENTER (USA)
SPECIFICATIONS
materialSTEEL COMP 316 BODY
seat_angle37.0 DEGREES ALL ENDS
thread_class3A ALL ENDS A
connection_typeTHREADED EXTERNAL TUBE ALL ENDS
connection_styleFLARED (TUBE) ALL ENDS
style_designatorSTRAIGHT THRU
thread_directionRIGHT-HAND ALL ENDS
mounting_positionHORIZONTAL
operating_pressure3000.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
disk_loading_methodSPRING
flow_control_devicePOPPET
nominal_thread_size0.500 INCHES ALL ENDS IN
NSN4820-01-424-6205
COMPONENT DIAGRAM
GATE VALVE — FULL OPEN OR FULL CLOSE ONLY Rising STEM BONNET FLOW → → FLOW SEATS — — SIZE: — · — · — PN: 9167762-1 · OEM ⚠ VERIFY BEFORE ORDERING Gate valves = FULL OPEN or FULL CLOSE only — never throttle. Partial opening causes seat erosion and vibration. ✓ BROKER TIP Rising stem shows valve position visually — easier maintenance. Non-rising stem saves headroom. PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FLOW CONTROL DEVICE: POPPET
•
CONNECTION STYLE: FLARED (TUBE) ALL ENDS
•
MOUNTING POSITION: HORIZONTAL
•
MINIMUM OPERATING TEMP: -40.0 FAHRENHEIT DEGF
•
CONNECTION TYPE: THREADED EXTERNAL TUBE ALL ENDS
•
STYLE DESIGNATOR: STRAIGHT THRU
•
OPERATING PRESSURE: 3000.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
•
THREAD DIRECTION: RIGHT-HAND ALL ENDS
TECHNICAL CHARACTERISTICS
FLOW CONTROL DEVICEPOPPET
CONNECTION STYLEFLARED (TUBE) ALL ENDS
MOUNTING POSITIONHORIZONTAL
MINIMUM OPERATING TEMP-40.0 FAHRENHEIT DEGF
CONNECTION TYPETHREADED EXTERNAL TUBE ALL ENDS
STYLE DESIGNATORSTRAIGHT THRU
OPERATING PRESSURE3000.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
THREAD DIRECTIONRIGHT-HAND ALL ENDS
NOMINAL THREAD SIZE0.500 INCHES ALL ENDS IN
SEAT ANGLE37.0 DEGREES ALL ENDS
SUBSTITUTES & CROSS-REFERENCES 1
SS-8C-BU-1Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 9167762-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 9167762-1?
9167762-1 is a VALVE,CHECK.
What parts can replace 9167762-1?
There is 1 known substitute for 9167762-1: SS-8C-BU-1. Substitute compatibility should be verified for your specific system.
What is the NSN for 9167762-1?
9167762-1 is cataloged in the U.S. Government catalog under NSN 4820-01-424-6205. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 9167762-1

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.