PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 9167294-1
9167294-1 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The PIN,STRAIGHT,HEADLESS is a the manufacturer industrial component. Key specifications include material: STEEL COMP 303 OVERALL, surface_finish: 16.0 MICROINCHES OUTSIDE DIAMETER, first_end_style: CHAMFERED, surface_treatment: PASSIVATE OVERALL, pin_overall_length: 1.990 INCHES MINIMUM AND 2.010 INCHES MAXIMUM IN, pin_overall_diameter: 0.1870 INCHES MINIMUM AND 0.1872 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-805-5291, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
9167294-1
NSN: 5315-00-805-5291
FSC: 5315
CAGE: 18876 — US ARMY AVIATION AND MISSILE COMMAND (USA)
SPECIFICATIONS
materialSTEEL COMP 303 OVERALL
surface_finish16.0 MICROINCHES OUTSIDE DIAMETER
first_end_styleCHAMFERED
surface_treatmentPASSIVATE OVERALL
pin_overall_length1.990 INCHES MINIMUM AND 2.010 INCHES MAXIMUM IN
pin_overall_diameter0.1870 INCHES MINIMUM AND 0.1872 INCHES MAXIMUM IN
first_end_taper_angle43.0 DEGREES MINIMUM AND 47.0 DEGREES MAXIMUM
first_end_taper_length0.015 INCHES MINIMUM AND 0.025 INCHES MAXIMUM IN
material_document_and_classificationQQ-S-764,COND A FED SPEC SINGLE MATERIAL RESPONSE OVERALL
second_end_relationship_with_first_endIDENTICAL
surface_treatment_document_and_classification171,5.4.1 MIL STD SINGLE TREATMENT RESPONSE OVERALL
NSN5315-00-805-5291
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 9167294-1 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT: PASSIVATE OVERALL
•
MATERIAL: STEEL COMP 303 OVERALL
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: 171,5.4.1 MIL STD SINGLE TREATMENT RESPONSE OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-764,COND A FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
FIRST END TAPER LENGTH: 0.015 INCHES MINIMUM AND 0.025 INCHES MAXIMUM IN
•
PIN OVERALL LENGTH: 1.990 INCHES MINIMUM AND 2.010 INCHES MAXIMUM IN
•
FIRST END STYLE: CHAMFERED
•
PIN OVERALL DIAMETER: 0.1870 INCHES MINIMUM AND 0.1872 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
SURFACE TREATMENTPASSIVATE OVERALL
MATERIALSTEEL COMP 303 OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION171,5.4.1 MIL STD SINGLE TREATMENT RESPONSE OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-764,COND A FED SPEC SINGLE MATERIAL RESPONSE OVERALL
FIRST END TAPER LENGTH0.015 INCHES MINIMUM AND 0.025 INCHES MAXIMUM IN
PIN OVERALL LENGTH1.990 INCHES MINIMUM AND 2.010 INCHES MAXIMUM IN
FIRST END STYLECHAMFERED
PIN OVERALL DIAMETER0.1870 INCHES MINIMUM AND 0.1872 INCHES MAXIMUM IN
SECOND END RELATIONSHIP WITH FIRST ENDIDENTICAL
FIRST END TAPER ANGLE43.0 DEGREES MINIMUM AND 47.0 DEGREES MAXIMUM
VERIFIED SUBSTITUTES & CROSS-REFERENCES 7
A220Interchangeable
interchangeable cross-reference
interchangeable
BS6-1893PC4Interchangeable
interchangeable cross-reference
interchangeable
277-011Interchangeable
interchangeable cross-reference
interchangeable
77-1704Interchangeable
interchangeable cross-reference
interchangeable
A-0220Interchangeable
interchangeable cross-reference
interchangeable
ANKOM220Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 9167294-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 9167294-1?
9167294-1 is a PIN,STRAIGHT,HEADLESS.
What parts can replace 9167294-1?
There are 7 known substitutes for 9167294-1: A220, BS6-1893PC4, 277-011 and 4 more. Substitute compatibility should be verified for your specific system.
Is 9167294-1 still available?
9167294-1 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 9167294-1

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026