PartsTable
Technical Data Sheet
Download PDF

9167281-3 — CATCH,FLUSH

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

9167281-3: CATCH,FLUSH.

The CATCH,FLUSH is a the manufacturer industrial component. Key specifications include width: 1.125 INCHES NOMINAL IN, length: 2.406 INCHES NOMINAL IN, material: UNABLE TO DECODE, special_features: BODY MATL CRES STEEL, style_designator: FLUSH LEVER ACTUATOR, surface_treatment: UNABLE TO DECODE. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-682-1696, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
9167281-3
NSN: 5340-00-682-1696
FSC: 5340 — Hardware, Commercial
CAGE: 18876 — US ARMY AVIATION AND MISSILE COMMAND (USA)
SPECIFICATIONS
width1.125 INCHES NOMINAL IN
length2.406 INCHES NOMINAL IN
materialUNABLE TO DECODE
special_featuresBODY MATL CRES STEEL
style_designatorFLUSH LEVER ACTUATOR
surface_treatmentUNABLE TO DECODE
bolt_offset_distance0.094 INCHES NOMINAL IN
lever_offset_distance0.063 INCHES NOMINAL IN
mounting_hole_diameter0.112 INCHES NOMINAL IN
end_item_identificationW/S:GUIDED MISSILE, INTERCEPT; MISSILE, VEHICLE MOUNTED STINGER (AVENGER)
center_to_center_distance_between_mounting_holes_along_width0.563 INCHES NOMINAL IN
center_to_center_distance_between_mounting_holes_along_length0.563 INCHES NOMINAL IN
NSN5340-00-682-1696
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 9167281-3 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BOLT OFFSET DISTANCE: 0.094 INCHES NOMINAL IN
•
LENGTH: 2.406 INCHES NOMINAL IN
•
LEVER OFFSET DISTANCE: 0.063 INCHES NOMINAL IN
•
STYLE DESIGNATOR: FLUSH LEVER ACTUATOR
•
MOUNTING HOLE DIAMETER: 0.112 INCHES NOMINAL IN
•
CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG WIDTH: 0.563 INCHES NOMINAL IN
•
CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG LENGTH: 0.563 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
BOLT OFFSET DISTANCE0.094 INCHES NOMINAL IN
LENGTH2.406 INCHES NOMINAL IN
LEVER OFFSET DISTANCE0.063 INCHES NOMINAL IN
STYLE DESIGNATORFLUSH LEVER ACTUATOR
MOUNTING HOLE DIAMETER0.112 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG WIDTH0.563 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG LENGTH0.563 INCHES NOMINAL IN
SPECIAL FEATURESBODY MATL CRES STEEL
SURFACE TREATMENTUNABLE TO DECODE
WIDTH1.125 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 3
9167891Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
CB83314-42SSReference document
Same NSN cross-reference
Reference document — Secondary reference
HC-83314-42-SS-NMReference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 9167281-3?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 9167281-3?
9167281-3 is a CATCH,FLUSH.
What parts can replace 9167281-3?
There are 3 known substitutes for 9167281-3: 9167891, CB83314-42SS, HC-83314-42-SS-NM. Substitute compatibility should be verified for your specific system.
What is the NSN for 9167281-3?
9167281-3 is cataloged in the U.S. Government catalog under NSN 5340-00-682-1696. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 9167281-3

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.