PartsTable
Technical Data Sheet
Download PDF

9165-18 — PIN,STRAIGHT,HEADED

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

9165-18: PIN,STRAIGHT,HEADED.

The PIN,STRAIGHT,HEADED is a the manufacturer industrial component. Key specifications include height: 0.050 INCHES NOMINAL IN, diameter: 0.136 INCHES MINIMUM AND 0.138 INCHES MAXIMUM IN, material: STEEL COMP 4130 OVERALL, head_style: FLAT, chamfer_length: 0.050 INCHES NOMINAL IN, style_designator: STRAIGHT. This part is cataloged in the U.S.

Government catalog under NSN 5315-00-558-3466, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
9165-18
NSN: 5315-00-558-3466
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 6K4C8 — GOODRICH CORPORATION (USA)
SPECIFICATIONS
height0.050 INCHES NOMINAL IN
diameter0.136 INCHES MINIMUM AND 0.138 INCHES MAXIMUM IN
materialSTEEL COMP 4130 OVERALL
head_styleFLAT
chamfer_length0.050 INCHES NOMINAL IN
style_designatorSTRAIGHT
pin_chamfer_angle15.0 DEGREES NOMINAL
pin_head_diameter0.280 INCHES NOMINAL IN
surface_treatmentCADMIUM OVERALL
under_head_length0.470 INCHES NOMINAL IN
first_hole_diameter0.066 INCHES MINIMUM AND 0.069 INCHES MAXIMUM IN
hole_arrangement_styleONE END DRILLED
NSN5315-00-558-3466
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 9165-18 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CHAMFER LENGTH: 0.050 INCHES NOMINAL IN
•
HOLE ARRANGEMENT STYLE: ONE END DRILLED
•
UNDER HEAD LENGTH: 0.470 INCHES NOMINAL IN
•
PIN CHAMFER ANGLE: 15.0 DEGREES NOMINAL
•
FIRST HOLE DIAMETER: 0.066 INCHES MINIMUM AND 0.069 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: STRAIGHT
•
PIN HEAD DIAMETER: 0.280 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-6758 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
TECHNICAL CHARACTERISTICS
CHAMFER LENGTH0.050 INCHES NOMINAL IN
HOLE ARRANGEMENT STYLEONE END DRILLED
UNDER HEAD LENGTH0.470 INCHES NOMINAL IN
PIN CHAMFER ANGLE15.0 DEGREES NOMINAL
FIRST HOLE DIAMETER0.066 INCHES MINIMUM AND 0.069 INCHES MAXIMUM IN
STYLE DESIGNATORSTRAIGHT
PIN HEAD DIAMETER0.280 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-6758 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
DIAMETER0.136 INCHES MINIMUM AND 0.138 INCHES MAXIMUM IN
HEAD STYLEFLAT
OTHER ITEMS IN FSC 5315 — Nails, Machine Keys, and Pins
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5315-00-000-1037 5315-00-000-1067 5315-00-000-1245 5315-00-000-1372 5315-00-000-1412 5315-00-001-1571 5315-00-001-1572 5315-00-001-1602
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Terminal item — no further procurement; issued until stock is exhaustedNo demilitarization required
Ready to buy 9165-18?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 9165-18?
9165-18 is a PIN,STRAIGHT,HEADED.
What is the NSN for 9165-18?
9165-18 is cataloged in the U.S. Government catalog under NSN 5315-00-558-3466. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 9165-18

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.