PartsTable
Technical Data Sheet
Download PDF

915825 — CLIP,RETAINING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

915825: CLIP,RETAINING.

The CLIP,RETAINING is a the manufacturer industrial component. Key specifications include material: CELLULOSE OVERALL, hole_diameter: 0.344 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 4.374 INCHES NOMINAL IN, special_features: ONE 5/8 IN. CUT-OUT ON INSIDE PERIPHERY IN, aperture_diameter: 3.688 INCHES NOMINAL IN, bolt_circle_diameter: 3.750 INCHES NOMINAL IN.

This part is cataloged in the U.S. Government catalog under NSN 5340-00-353-0967, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
915825
NSN: 5340-00-353-0967
NIINs: 003530967, 006156756
FSC: 5340 — Hardware, Commercial
CAGE: 24617 — GENERAL MOTORS CORP (USA)
SPECIFICATIONS
materialCELLULOSE OVERALL
hole_diameter0.344 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
overall_width4.374 INCHES NOMINAL IN
special_featuresONE 5/8 IN. CUT-OUT ON INSIDE PERIPHERY IN
aperture_diameter3.688 INCHES NOMINAL IN
bolt_circle_diameter3.750 INCHES NOMINAL IN
outside_corner_radius0.312 INCHES NOMINAL IN
cross-sectional_thickness0.010 INCHES NOMINAL IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
side_radius_from_gasket_center1.875 INCHES NOMINAL IN
NSN5340-00-353-0967
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 915825 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: PIN
•
CASEHARDENING INDICATOR: NOT CASEHARDENED
•
SURFACE TREATMENT: CADMIUM
•
WIDTH: 1.250 INCHES NOMINAL IN
•
MATERIAL: STEEL
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT1.094 INCHES NOMINAL IN
STYLE DESIGNATORPIN
CASEHARDENING INDICATORNOT CASEHARDENED
SURFACE TREATMENTCADMIUM
WIDTH1.250 INCHES NOMINAL IN
MATERIALSTEEL
SUBSTITUTES & CROSS-REFERENCES 7
914255Reference document
Same NSN cross-reference
Reference document — Secondary reference
050889Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
0050889-5Reference document
Same NSN cross-reference
Reference document — Secondary reference
341135Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
033216Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
0050889Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 915825?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 915825?
915825 is a CLIP,RETAINING.
What parts can replace 915825?
There are 7 known substitutes for 915825: 914255, 050889, 0050889-5 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 915825?
915825 is cataloged in the U.S. Government catalog under NSN 5340-00-353-0967. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 915825