PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 9151C5
9151C5 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLIP,SPRING TENSION is a the manufacturer industrial component. Key specifications include width: 1.080 INCHES NOMINAL IN, length: 2.060 INCHES NOMINAL IN, material: STEEL COMP 302 OVERALL, smallest_width: 0.450 INCHES NOMINAL IN, material_thickness: 0.041 INCHES NOMINAL IN, material_document_and_classification: SAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-721-7292, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
9151C5
NSN: 5340-00-721-7292
FSC: 5340
CAGE: 94120 — AQUALUNG USA, INC (USA)
SPECIFICATIONS
width1.080 INCHES NOMINAL IN
length2.060 INCHES NOMINAL IN
materialSTEEL COMP 302 OVERALL
smallest_width0.450 INCHES NOMINAL IN
material_thickness0.041 INCHES NOMINAL IN
material_document_and_classificationSAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NSN5340-00-721-7292
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 9151C5 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: STEEL COMP 302 OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: SAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
WIDTH: 1.080 INCHES NOMINAL IN
•
LENGTH: 2.060 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.041 INCHES NOMINAL IN
•
SMALLEST WIDTH: 0.450 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALSTEEL COMP 302 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONSAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL
WIDTH1.080 INCHES NOMINAL IN
LENGTH2.060 INCHES NOMINAL IN
MATERIAL THICKNESS0.041 INCHES NOMINAL IN
SMALLEST WIDTH0.450 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 16
CRF5Interchangeable
interchangeable cross-reference
interchangeable
11581Interchangeable
interchangeable cross-reference
interchangeable
AC11581Interchangeable
interchangeable cross-reference
interchangeable
10-10-05Interchangeable
interchangeable cross-reference
interchangeable
5800332-15Interchangeable
interchangeable cross-reference
interchangeable
217Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 9151C5?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 9151C5?
9151C5 is a CLIP,SPRING TENSION.
What parts can replace 9151C5?
There are 16 known substitutes for 9151C5: CRF5, 11581, AC11581 and 13 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 9151C5?
9151C5 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-721-7292. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 9151C5

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026