PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 9151255
9151255 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.173 INCHES NOMINAL IN, material: ALUMINUM ALLOY 2024 BAND, loop_width: 0.375 INCHES NOMINAL IN, loop_length: 0.750 INCHES NOMINAL IN, overall_width: 0.375 INCHES NOMINAL IN, style_designator: MULTIPLE LOOP. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-754-1882, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
9151255
NSN: 5340-00-754-1882
FSC: 5340
CAGE: 18876 — US ARMY AVIATION AND MISSILE COMMAND (USA)
SPECIFICATIONS
diameter0.173 INCHES NOMINAL IN
materialALUMINUM ALLOY 2024 BAND
loop_width0.375 INCHES NOMINAL IN
loop_length0.750 INCHES NOMINAL IN
overall_width0.375 INCHES NOMINAL IN
style_designatorMULTIPLE LOOP
tongue_hole_typeROUND, UNTHREADED
material_thickness0.040 INCHES NOMINAL IN
material_document_and_classificationQQ-A-250/5 TEMPER 0 FED SPEC SINGLE MATERIAL RESPONSE BAND
distance_from_loop_center_to_tongue_end0.938 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole0.703 INCHES NOMINAL IN
NSN5340-00-754-1882
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 9151255 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LOOP WIDTH: 0.375 INCHES NOMINAL IN
•
STYLE DESIGNATOR: MULTIPLE LOOP
•
DIAMETER: 0.173 INCHES NOMINAL IN
•
MATERIAL: ALUMINUM ALLOY 2024 BAND
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 0.938 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.040 INCHES NOMINAL IN
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.703 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
LOOP WIDTH0.375 INCHES NOMINAL IN
STYLE DESIGNATORMULTIPLE LOOP
DIAMETER0.173 INCHES NOMINAL IN
MATERIALALUMINUM ALLOY 2024 BAND
DISTANCE FROM LOOP CENTER TO TONGUE END0.938 INCHES NOMINAL IN
OVERALL WIDTH0.375 INCHES NOMINAL IN
MATERIAL THICKNESS0.040 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE0.703 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-250/5 TEMPER 0 FED SPEC SINGLE MATERIAL RESPONSE BAND
LOOP LENGTH0.750 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
ESP-M-2.121-PPInterchangeable
interchangeable cross-reference
interchangeable
20990R1Interchangeable
interchangeable cross-reference
interchangeable
SAE J531 6 130109FBMInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 9151255?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 9151255?
9151255 is a CLAMP,LOOP.
What parts can replace 9151255?
There are 3 known substitutes for 9151255: ESP-M-2.121-PP, 20990R1, SAE J531 6 130109FBM. Substitute compatibility should be verified for your specific system.
Is 9151255 still available?
9151255 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 9151255

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026