PartsTable
Technical Data Sheet
Download PDF

91465-3 — 91465-3

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

91465-3: 91465-3.

The 91465-3 is a the manufacturer industrial component. Key specifications include movement_type: MOVING IRON VANE, pointer_color: BLACK SINGLE INDICATOR SINGLE RANGE, indicator_type: DIAL W/POINTER, overall_length: 2.530 INCHES NOMINAL IN, overall_diameter: 3.500 INCHES NOMINAL IN, style_designator: ROUND FLUSH MTG. This part is cataloged in the U.S.

Government catalog under NSN 3120-00-662-3484, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 91465-3
NSN: 3120-00-662-3484
NIINs: 006623484, 009736963
FSC: 3120 — Bearings, Plain, Unmounted
CAGE: 6K4C8 — GOODRICH CORPORATION (USA)
SPECIFICATIONS
movement_typeMOVING IRON VANE
pointer_colorBLACK SINGLE INDICATOR SINGLE RANGE
indicator_typeDIAL W/POINTER
overall_length2.530 INCHES NOMINAL IN
overall_diameter3.500 INCHES NOMINAL IN
style_designatorROUND FLUSH MTG
measurement_range+0.0 TO 100.0 MILLIAMPERES, AC SINGLE INDICATOR SINGLE RANGE
sensitivity_rating20.0 OHMS PER VOLT
accuracy_in_percent-1.0 TO 1.0 AT FULL SCALE SINGLE INDICATOR SINGLE RANGE
installation_designPANEL
fsc_application_dataTEST SET ELECTRONIC
scale_graduation_typeLINEAR SINGLE INDICATOR SINGLE RANGE
NSN3120-00-662-3484
COMPONENT DIAGRAM
BALL BEARING — SEAL TYPE DETERMINES MAINTENANCE OD: — · BORE: — · WIDTH: — SEAL: Open · PN: 91465-3 · OEM ⚠ VERIFY BEFORE ORDERING ABEC grade: higher = tighter tolerance = higher cost. ABEC-1 is standard, ABEC-7+ for precision spindles. Open, shielded (ZZ), and sealed (2RS) versions have different max RPM ratings ✓ BROKER TIP 2RS = sealed for life (no maintenance). ZZ = shielded, re-greaseable. Open = must lubricate on install. Common interchange: 6205-2RS = 6205-2RSR = 6205-DDU (same bearing, different suffix) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE FINISH: 100.0 MICROINCHES OUTSIDE DIAMETER SURFACE OF FLANGE
•
CORNER SHAPE: SQUARE ALL CORNERS
•
FLANGE OUTSIDE DIAMETER: 0.8740 INCHES MINIMUM AND 0.8760 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
SURFACE FINISH100.0 MICROINCHES OUTSIDE DIAMETER SURFACE OF FLANGE
SURFACE FINISH100.0 MICROINCHES RIGHT END SURFACE OF BODY
SURFACE FINISH40.0 MICROINCHES INSIDE DIAMETER SURFACE OF BODY
SURFACE FINISH100.0 MICROINCHES RIGHT END SURFACE OF LEFT FLANGE
SURFACE FINISH100.0 MICROINCHES OUTSIDE DIAMETER SURFACE OF BODY
SURFACE FINISH40.0 MICROINCHES LEFT END SURFACE OF BODY AND FLANGE
CORNER SHAPESQUARE ALL CORNERS
FLANGE OUTSIDE DIAMETER0.8740 INCHES MINIMUM AND 0.8760 INCHES MAXIMUM IN
BODY OUTSIDE DIAMETER0.5009 INCHES MINIMUM AND 0.5015 INCHES MAXIMUM IN
STYLE DESIGNATORSOLID, EXTERNAL FLANGE ONE END
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Demilitarization required — mutilation
Ready to buy 91465-3?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 91465-3?
91465-3 is a 91465-3. It is classified as a MRO (MRO_GENERAL).
What is the NSN for 91465-3?
91465-3 is cataloged in the U.S. Government catalog under NSN 3120-00-662-3484. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 91465-3